The hot-links go to the abstract on the publishers website.  You may need to use the University of Plymouth electronic library to access the full paper.  Some papers may only be accessible using Inter-Library Loans.

• Acoustic emission
• IM De Rosa, C Santulli and F Sarasin [83 references], Acoustic emission for monitoring the mechanical behaviour of natural fibre composites: a literature review, Composites Part A: Applied Science and Manufacturing, September 2009, 40(9), 1456-1469.
• Adhesive bonding
  • DF Farrar [71 references], Bone adhesives for trauma surgery: a review of challenges and developments, International Journal of Adhesion and Adhesives, March 2012, 33(1), 89-97.
  • Xiaocong He [210 references], A review of finite element analysis of adhesively bonded joints, International Journal of Adhesion and Adhesives, June 2011, 31(4), 248-264.
  • F Awaja, M Gilbert, G Kelly, B Fox and PJ Pigram [242 references], Adhesion of polymers, Progress in Polymer Science, September 2009, 34(9), 948-968.
  • MD Banea and LFM da Silva, Adhesively bonded joints in composite materials: an overview, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2009, 223(1), 1-18.
  • LFM da Silva, PJC das Neves, RD Adams and JK Spelt, Analytical models of adhesively bonded joints, Part I: literature survey, International Journal of Adhesion and Adhesives, April 2009, 29(3), 319-330.
    LFM da Silva, PJC das Neves, RD Adams, A Wang and JK Spelt, Analytical models of adhesively bonded joints. Part II: comparative study, International Journal of Adhesion and Adhesives, April 2009, 29(3), 331-341.
  • A Baldan, Adhesively-bonded joints in metallic alloys, polymers and composite materials: mechanical and environmental durability performance, Journal of Materials Science, August 2004, 39(15), Pages 4729-4797
  • A Baldan, Adhesively-bonded joints and repairs in metallic alloys, polymers and composite, Journal of Materials Science, January 2004, 39(1), 1-49.
  • IJ Munns and GA Georgiou [57 references], Non-destructive testing methods for adhesively bonded joint inspection, Insight, December 1995, 37(12), 941-952.
• Agro-chemicals
• JR Fianko, A Donkor, ST Lowor and PO Yeboah [40 references], Agrochemicals and the Ghanaian environment - a review, Journal of Environmental Protection, 2011, 2(3), 221-230.
Alginates
• Kuen Yong Lee and DJ Mooney [182 references], Alginate: properties and biomedical applications, Progress in Polymer Science, January 2012, 37(1), 106-126.
• Ji-Sheng Yang, Ying-Jian Xie and Wen He [50 references], Research progress on chemical modification of alginate: a review, Carbohydrate Polymers, 11 February 2011, 84(1), 33–39.
• Aligned discontinuous carbon fibres
• SJ Ng and RJ Meilunas [17 references], A review of aligned discontinuous carbon fibre systems for composites forming, SAMPE Journal, November/December 2007, 43(6), 17-20.
• Aluminium matrix composites
• K Raju, SN Ojha and AP Harsha [xx references], Spray forming of aluminium alloys and its composites: an overview, Journal of Materials Science, April 2008, 43(8), 2509-2521.
• BS Reddy, K Das and S Das, [xx references], A review on the synthesis of in situ aluminium based composites by thermal, mechanical and mechanical–thermal activation of chemical reactions, Journal of Materials Science, 2007, 42(22), 9366-9378.
• Analysis
• Z Hashin [177 references], Analysis of composite materials – a survey, Transactions of ASME: Journal of Applied Mechanics, September 1983, 50(3), 481-505.
• Anisogrid lattice structures
  • VV Vasiliev, VA Barynin and AF Rasin [23 references], Anisogrid lattice structures – survey of development and application, Composite Structures, November-December 2001, 54(2-3), 361-370.
• Anti-fouling paints
• A Turner [93 references], Marine pollution from antifouling paint particles, Marine Pollution Bulletin, February 2010, 60(2), 159-171.
• Shenfu Chen, Lingyan Li, Chao Zhao, Jie Zheng [130 references], Surface hydration: principles and applications toward low-fouling/nonfouling biomaterials, Polymer, 29 October 2010, 51(23), 5283-5293.
• Shaoyi Jiang and Zhiqiang Cao [110 references], Ultralow-fouling, functionalizable, and hydrolyzable zwitterionic materials and their derivatives for biological applications, Advanced Materials, 05 March 2010, 22(9), 930-932.
• CM Magin, SP Cooper and AB Brennan [111 refences], Non-toxic antifouling strategies, Materials Today, April 2010, 13(4), 36-44.
• Emily Ralston and Geoffrey Swain [104 references], Bioinspiration - the solution for biofouling control?, Bioinspiration & Biomimetics, 1 March 2009, 4(1), 015007 (9 pp).
• Ping Gong and DW Grainger, Nonfouling surfaces: a review of principles and applications for microarray capture assay designs, Microarrays - Methods in Molecular Biology, 2007, (381), 59-92.
• AM Van Londen [41 references], A study of ship bottom paints, in particular pertaining to the behaviour and action of anti-fouling paints, TNO Paint Research Institute Report 54C, Delft - NL, September 1963.
• Anti-microbial
• A Muñoz-Bonilla and M Fernández-García [439 references], Polymeric materials with antimicrobial activity, Progress in Polymer Science, February 2012, 37(2), 281-339.
• CD Papaspyrides, S Pavlidou and SN Vouyiouka [53 references], Development of advanced textile materials: natural fibre composites, anti-microbial, and flame-retardant fabrics, Proc. IMechE Part L: Journal of Materials: Design and Applications, 2009, 223(2), 91-102.
• Aromatic polyamides
  • JM García, FC García, F Serna and JL de la Peña [200 references], High-performance aromatic polyamides, Progress in Polymer Science, May 2010, 35(5), 623-686.
• Artificial neural networks
  • H El Kadi [64 references], Modelling the mechanical behaviour of fiber-reinforced polymeric composite materials using artificial neural networks : a review, Composite Structures, May 2006, 73(1), 1-23.
  • Z Zhang and K Friedrich [59 references], Artificial neural networks applied to polymer composites: a review, Composites Science and Technology, 2003, 63(14), 2029-2044.
  • H-C Zhang and SH Huang [113 references], Applications of neural networks in manufacturing: a state-of-the-art survey, International Journal of Production Research, March 1995, 33(3), 705-728.
• Automated processes
• H-JAD Lukaszewicz, C Ward and KD Potter [111 references], The engineering aspects of automated prepreg layup: history, present and future, Composites Part B: Engineering, April 2012, 43(3), 997-1009.
• Automotive coating systems
  • K Adamsons [159 references], Chemical surface characterization and depth profiling of automotive coating systems, Progress in Polymer Science, 2000, 25(9), 1363-1409.
• Automotive components
• AJ Wootton, JC Hendry, AK Criden and JDA Hughes [3 references], Structural automotive components in fibre reinforced plastics [suspension arm, coil springs, wheel], Chapter 2 in Composite Structures 3, Elsevier Applied Science Publishers, Barking, 1985, pages 19-42.  ISBN 0-85334-378-0.  Proceedings of the 3rd International Conference on Composite Structures, Paisley, 9-11 September 1985.  UOP Library
• Auxetic materials
• Yanping Liu and Hong Hu [118 refences], A review on auxetic structures and polymeric materials, Scientific Research and Essays, 18 May 2010, 5(10), 1052-1063.
• W Miller, CW Smith, DS Mackenzie and KE Evans [88 references], Negative thermal expansion: a review, Journal of Materials Science, 2009, 44(20), 5441-5451.
• A Alderson and KL Alderson, Auxetic materials, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, August 2007, 221(4), 565-575.
• W Yang, Z-M Li, W Shi, B-H Xie and M-B Yang, Review on auxetic materials, Journal of Materials Science, 15 May 2004, 39(10), 3269-3279.
• Ballistic fibres
  • GA Holmes, K Rice, and CR Snyder [43 references], Ballistic fibres: a review of the thermal, ultraviolet and hydrolytic stability of the benzoxazole ring structure, Journal of Materials Science, 2006, 41(13),4105-416.
• Biaxial strength
  • Holger Thom [97 references], A review of the biaxial strength of fibre-reinforced plastics, Composites Part A: Applied Science and Manufacturing, 1998, 29(8), 869-886.
  • AS Chen and FL Matthews [58 references], A review of multiaxial/biaxial loading tests for composite materials, Composites, 1993, 24(5), 395-406.
• Bio-based resins
  • J-M Raquez, M Deléglise, M-F Lacrampe and P Krawczak [214 references], Thermosetting (bio)materials derived from renewable resources: a critical review, Progress in Polymer Science, April 2010, 35(4), 487-509.
  • R Kozlowski and K Bujnowicz [16 references], Polymers from vegetable oils, Przemyst Chemiczny, December 2008, 87(12), 1168-1170, in Polish.
  • Vinay Sharma and PP Kundu [81 references], Condensation polymers from natural oils, Progress in Polymer Science, December 2008, 33(12), 1199-1215.
  • Vinay Sharma and PP Kundu [64 references], Addition polymers from natural oils - a review, Progress in Polymer Science, 2006, 31(11), 983-1008.
  • F Seniha Güner, Yusuf Yağcı and A Tuncer Erciyes [215 references], Polymers from triglyceride oils, Progress in Polymer Science, 2006, 31(7) 633–670.
  • Long Yu, Katherine Dean and Lin Li [151 references], Polymer blends and composites from renewable resources, Progress in Polymer Science, June 2006, 31(6), 576–602.
  • Anders Södergård and Mikael Stolt [349 references], Properties of lactic acid based polymers and their correlation with composition, Progress in Polymer Science, 2002, 27(6), 1123-1163.
• Biocomposites
  • F Vilaplana, E Strömberg and S Karlsson [143 references], Environmental and resource aspects of sustainable biocomposites, Polymer Degradation and Stability, November 2010, 95(11), 2147-2161.
  • Perrine Bordes, Eric Pollet and Luc Avérous [193 references], Nano-biocomposites: biodegradable polyester/nanoclay systems, Progress in Polymer Science, February 2009, 34(2), 125-155.
  • PA Fowler, JM Hughes and RM Elias [97 references], Biocomposites: technology, environmental credentials and market forces, Journal of the Science of Food and Agriculture, 2006, 86(12), 1781-1789.
• Biodegradable polymers
• Huayu Tian, Zhaohui Tang, Xiuli Zhuang, Xuesi Chen and Xiabin Jing [363 references], Biodegradable synthetic polymers: preparation, functionalization and biomedical application, Progress in Polymer Science, February 2012, 37(2), 237-280.
• A Ammala, S Bateman, K Dean, E Petinakis, P Sangwan, S Wong, Q Yuan, L Yu, C Patrick and KH Leong [127 references], An overview of degradable and biodegradable polyolefins, Progress in Polymer Science, August 2011, 36(8), 1015-1049.
• B Simoncic, B Tomsic, B Orel and I Jerman, Biodegradation of Cellulose Fibers, Nova Science Publishers, 18 Aug 2010. ISBN-13: 978-1-61668-154-8.
• KG Satyanarayana, GGC Arizaga and F Wypych [260 references], Biodegradable composites based on lignocellulosic fibers — an overview, Progress in Polymer Science, September 2009, 34(9), 982-1021.
• R Chandra and R Rustgi [356 references], Biodegradable polymers, Progress in Polymer Science, 1998, 23(7), 1273-1335.
• Biomaterials
• G Jutz and A Böker [279 references], Bionanoparticles as functional macromolecular building blocks – a new class of nanomaterials, Polymer, 21 January 2011, 52(2), 211-232.
• MI Sabir, X Xu and L Li [81 references], A review on biodegradable polymeric materials for bone tissue engineering applications, Journal of Materials Science, 2009, 44(21), 5713-5724.
• Paul Roach, David Eglin, Kirsty Rohde and Carole C Perry, Modern biomaterials: a review - bulk properties and implications of surface modifications, Journal of Materials Science: Materials in Medicine, July 2007, 18(7), 1263-1277.
• Biomedical composites
  • Jun Feng, Ren-Xi Zhuo, Xian-Zheng Zhang [149 references], Construction of functional aliphatic polycarbonates for biomedical applications, Progress in Polymer Science, February 2012, 37(2), 211-236.
  • M-S Scholz, JP Blanchfield, LD Bloom, BH Coburn, M Elkington, JD Fuller, ME Gilbert, SA Muflahi, MF Pernice, SI Rae, JA Trevarthen, SC White, PM Weaver and IP Bond [124 references],
    The use of composite materials in modern orthopaedic medicine and prosthetic devices: a review, Composites Science and Technology, 14 November 2011, 71(16), 1791-1803.
  • S Zahedi, A step change, Ingenia, December 2010, (45), 24-29.
  • I Armentano, M Dottori, E Fortunati, S Mattioli and JM Kenny [267 references], Biodegradable polymer matrix nanocomposites for tissue engineering: a review, Polymer Degradation and Stability, November 2010, 95(11), 2126-2146.
  • AR Boccaccini, M Erol, WJ Stark, D Mohn, Z Hong and JF Mano, Polymer/bioactive glass nanocomposites for biomedical applications: a review, Composites Science and Technology, 15 November 2010, 70(13), 1764-1776.
  • Hong Chen, Lin Yuan, Wei Song, Zhongkui Wu and Dan Li, Biocompatible polymer materials: role of protein–surface interactions, November 2008, Progress in Polymer Science, November 2008, 33(11), 1059-1087.
  • Hoi-an Cheung, Kin-Tak Lau, Tung-Po Lu and David Hui [43 references], A critical review on polymer-based bio-engineered materials for scaffold development, Composites Part B: Engineering, 2007, 38(3), 291-300.
  • K Fujihara, K Teo, R Gopal, PL Loh, VK Ganesh, S Ramakrishna, KWC Foong and CL Chew [93 references], Fibrous composite materials in dentistry and orthopaedics: review and applications, Composites Science and Technology, 2004, 64(6), 775-788.
  • João F Mano, RA Sousa, LF Boesel, NM Neves and RL Reis [324 references], Bioinert, biodegradable and injectable polymeric matrix composites for hard tissue replacement: state of the art and recent developments, Composites Science and Technology, 2004, 64(6), 789-817.
  • S Ramakrishna, J Mayer, E Wintermantel and KW Leong [277 references], Biomedical applications of polymer-composite materials: a review, Composites Science and Technology, 2001, 61(9), 1189-1224.
• Biomimetics
  • K Shanmuganathan, JR Capadona, SJ Rowan and C Weder [65 references], Biomimetic mechanically adaptive nanocomposites, Progress in Polymer Science, January-February 2010, 35(1-2), 212-222.
  • Emily Ralston and Geoffrey Swain [104 references], Bioinspiration - the solution for biofouling control?, Bioinspiration & Biomimetics, 1 March 2009, 4(1), 015007 (9 pp).
  • Woo-Dong Jang, KM Kamruzzaman Selim, Chi-Hwa Lee, Inn-Kyu Kang [155 references], Bioinspired application of dendrimers: From bio-mimicry to biomedical applications, Progress in Polymer Science, January 2009, 34(1), 1-23.
  • Julian FV Vincent, Olga A Bogatyreva, Nikolaj R Bogatyrev, Adrian Bowyer and Anja-Karina Pahl [49 references], Biomimetics: its practice and theory, Journal of the Royal Society of London - Interface, 22 August 2006, 3(9), 471-482.
• Blast resistance
  • PA Buchan and JF Chen [35 references], Blast resistance of FRP composites and polymer strengthened concrete and masonry structures – a state-of-the-art review, Composites Part B: Engineering, July-September 2007, 38(5-6), 509-522.
• Bone
  • JD Currey [77 references], The structure and mechanics of bone, Journal of Materials Science, 2012, 47(1), 41-54.
• Braided composites
• Cagri Ayranci and Jason Carey, 2-D braided composites: a review for stiffness critical applications, Composite Structures, September 2008, 85(1), Pages 43-58.
• Bridges
  • HA Salim, JE Davalos, P Qiao and SA Kiger [23 references], Analysis and design of fiber reinforced plastic composite deck-and-stringer bridges, Composite Structures, May-August 1997, 38(1-4), 295-307.
• Brittle matrix composites
• AG Evans and FW Zok [134 references], The physics and mechanics of fibre-reinforced brittle matrix composites, Journal of Materials Science, 1 August 1994, 29(15), 3857-3896.
• Buckling of composite plates
• P Nali, E Carrera and S Lecca [53 references], Assessments of refined theories for buckling analysis of laminated plates, Composite Structures, January 2011, 93(2), 456-464.
• AW Leissa [59 references], An overview of composite plate buckling, Composite Structures 4 Volume 1: Analysis and Design Studies (Proceedings of ICCS4, Paisley, 27-29 July 1987, 1.1-1.29).
• Buckling of cylinders
  • GJ Simitses [40+ references], Buckling of moderately thick laminated cylindrical shells: a review, Composites Part B: Engineering, 1996, 27(6), 581-587.
• Carbon fibres
• AG Dumanlı and AH Windle [127 references], Carbon fibres from cellulosic precursors: a review, Journal of Materials Science, 2012, 47(10), 4236-4250.
• MSA Rahaman, AF Ismail and A Mustafa [101 references], A review of heat treatment on polyacrylonitrile fiber, Polymer Degradation and Stability, August 2007, 92(8), 1421-1432.
• S Chand [151 references], Carbon fibers for composites, Journal of Materials Science, 15 March 2000, 35(6), 1303-1313.
• ME Westwood, JD Webster, RJ Day, FH Hayes and R Taylor [36 references], Oxidation protection for carbon fibre [ceramic matrix] composites, Journal of Materials Science, 15 March 1996, 31(6), 1389-1397.
• Cellulose fibre composites
• SJ Eichhorn, CA Baillie, N Zafeiropoulos, LY Mwaikambo, MP Ansell, A Dufresne, KM Entwistle, PJ Herrera-Franco, GC Escamilla, L Groom, M Hughes, C Hill, TG Rials and PM Wild, Current international research into cellulosic fibres and composites, Journal of Materials Science, May 2001, 36(9), 2107-2131.
• Peter Zugenmaier [59 references], Conformation and packing of various crystalline cellulose fibers, Progress in Polymer Science, 2001, 26(9), 1341-1417.
• AK Bledzki and J Gassan [163 references], Composites reinforced with cellulose based fibers, Progress in Polymer Science, 1999, 24(2), 221-274.
• J Schurz [no references], A bright future for cellulose, Progress in Polymer Science, 1999, 24(4), 481-483.
• Ceramic matrix composites
• MP Harmer, HM Chan and GA Miller [58 references], Unique opportunities for microstructural engineering with duplex and laminar ceramic composites, Journal of the American Ceramics Society, July 1992, 75(7), 1715-1728.
• Chitin and chitosan polymers
• M Dash, F Chiellini, RM Ottenbrite and E Chiellini [390 references], Chitosan - a versatile semi-synthetic polymer in biomedical applications, Progress in Polymer Science, August 2011, 36(8), 981-1014.
• SCM Fernandes, CSR Freire, AJD Silvestre, C Pascoal Neto and A Gandini [76 references], Novel materials based on chitosan and cellulose, Polymer International, June 2011, 60(6), 875–882.
• CKS Pillai, W Paul and CP Sharma [489 references], Chitin and chitosan polymers: chemistry, solubility and fiber formation, Progress in Polymer Science, July 2009, 34(7), 641-678.
• M Rinaudo [244 references], Chitin and chitosan: properties and applications, Progress in Polymer Science, July 2006, 31(7), 603-632.
• K Kurita [286 references], Controlled functionalization of the polysaccharide chitin, Progress in Polymer Science, November 2001, 26(9), 1921-1971.
• Commingled yarns
• N Svensson, R Shishoo and M Gilchrist, Manufacturing of thermoplastic composites from commingled yarns - a review, Journal of Thermoplastic Composite Materials, 1998, 11(1), 22-56.
• Composting
• BG Hermann, L Debeer, B de Wilde, K Blok and MK Patel [80 references], To compost or not to compost: carbon and energy footprints of biodegradable materials’ waste treatment, Polymer Degradation and Stability, June 2011, 96(6), 1159-1171.
• Computer microtomography
• K Schladitz, Quantitative micro-CT, Journal of Microscopy, August 2011, 243(2), 111–117.
• SR Stock, X-ray microtomography of materials, International Materials Reviews, April 1999, 44(4), 141-164.
• Condition monitoring
• PS Heyns [21 references], Tool condition monitoring using vibration measurements - a review, Insight (BJNDT), August, 2008, 49(8), 447-450.
• Conductive adhesives and polymers
• G Hansen, A review: what we dreamt as children - how conductive polymers are bringing our dreams to reality, Journal of Advanced Materials, 2006, 38(3), 68-74.
• PG Harris [22 references], Conductive adhesives: a critical review of progress to date, Soldering and Surface Mount Technology, May 1995, 7(2), 19-21+26.
• Construction industry applications
• E Guades, T Aravinthan, M Islam and A Manalo [43 references], A review on the driving performance of FRP composite piles, Composite Structures, May 2012, 94(6),1932-1942.
• MK Sharbatdar, M Saatcioglu and B Benmokrane [24 references], Seismic flexural behavior of concrete connections reinforced with CFRP bars and grids, Composite Structures, September 2011, 93(10), 2439-2449.
• SS Pendhari, T Kant and YM Desai [229 references], Application of polymer composites in civil construction: a general review, Composite Structures, July 2008, 84(2), 114-124.
• C Mota, S Alminar and D Svecova [16 references], Critical review of deflection formulas for FRP-RC members, Journal of Composites for Construction, 2006, 10(3), 183-194.
• CE Bakis, Lawrence C Bank, VL Brown, E Cosenza, JF Davalos, JJ Lesko, A Machida, SH Rizkalla and TC Triantafillou [102 references], Fiber-reinforced polymer composites for construction - state-of-the-art review, Journal of Composites in Construction, May 2002, 6(2), 73-87.
• SM Halliwell [107 references], Polymer composites in construction, Construction Research Communications Limited by permission of Building Research Establishment Limited, Watford/London, 2000. ISBN 1-86081-429-8.
• MG Iskander and M Hassan [26 references], State of the practice review in FRP composite piling, Journal of Composites for Construction, 1998, 2(3), 116-120.
• A Nanni, CE Bakis and TE Boothby, Test methods for FRP-concrete systems subjected to mechanical loads: state of the art review, Journal of Reinforced Plastics and Composites, June 1995, 14(), 524-558.
• Corrosion
  • CC Ihueze and NSA Obuka, Review of corrosion and corrosion schemes for metal and composite oil and gas systems: management and development, Journal of Advanced Materials, 2011, 43(2), 35-54.
• Coupling agents
  • Y Xie, CAS Hill, Z Xiao, H Militz and C Mai [148 references], Silane coupling agents used for natural fiber/polymer composites: a review, Composites Part A: Applied Science and Manufacturing, July 2010, 41(7), 806-819.
  • S Shokoohi, A Arefazar and R Khosrokhavar [48 references], Silane coupling agents in polymer-based reinforced composites: a review, Journal of Reinforced Plastics and Composites, 2008, 27(5), 473-485.
• Crashworthiness

  • MA Courteau and DO Adams, Composite tube testing for crashworthiness applications: a review, Journal of Advanced Materials, 2011, 43(2), 13-34.

  • DM Garner and DO Adams, Test methods for composites crashworthiness: a review, Journal of Advanced Materials, 2008, 40(4), 5-26.
  • AG Mamalis, M Robinson, DE Manolakos, GA Demosthenous, MB Ioannidis and J Carruthers [63 references], Crashworthy capability of composite material structures, Composite Structures, February 1997, 37(2), 109-134.
• Creep behaviour
• G Spathis and E Kontou [28 references], Creep failure time prediction of polymers and polymer composites, Composites Science and Technology, 21 May 2012, 72(9), 959-964.
• DW Scott, JS Lai and A-H Zureick [60 references], Creep behavior of fiber-reinforced polymeric composites: a review of the technical literature, Journal of Reinforced Plastics and Composites, June 1995, 14(6), 588-617.
• Crushing failure
  • STW Lau, MR Said and MY Yaakob [46 references], On the effect of geometrical designs and failure modes in composite axial crushing: a literature review, Pages Composite Structures, February 2012, 94(3), 803-812.
• Cryogenic properties
  • Okimichi Yano and Hitoshi Yamaoka [94 references], Cryogenic properties of polymers, Progress in Polymer Science, 1995, 20(4), 585-613.
  •  MB Kasen, Mechanical and thermal properties of filamentary-reinforced structural composites at cryogenic temperatures 1: glass-reinforced composites, Cryogenics, 1975, 15(6), 327-349.
  • MB Kasen, Mechanical and thermal properties of filamentary-reinforced structural composites at cryogenic temperatures 2: advanced composites, Cryogenics, 1975, 15(12), 701-722.
• Crystalline bulk polymers
• Gert Strobl [92 references], Crystallization and melting of bulk polymers: New observations, conclusions and a thermodynamic scheme, Progress in Polymer Science, April 2006, 31(4), 398-442.
• Andrzej Galeski [189 references], Strength and toughness of crystalline polymer systems, Progress in Polymer Science, 2003, 28(12), 1643-1699.
• ML Di Lorenzo and C Silvestre [127 references], Non-isothermal crystallization of polymers, Progress in Polymer Science, 1999, 24(6), 917-950.
• Yu Long, Robert A. Shanks and Zbigniew H. Stachurski [125 references], Kinetics of polymer crystallisation, Progress in Polymer Science, 1995, 20(4), 651-701.
• Cure kinetics
• G Tillet, B Boutevin and Bruno Ameduri [187 references], Chemical reactions of polymer crosslinking and post-crosslinking at room and medium temperature, Progress in Polymer Science, February 2011, 36(2), 191-217.
• E Ruiz and C Billotte [21 references], Predicting the cure of thermosetting polymers: the isoconversion map, Polymer Composites, 2009, 30(10), 1450-1457.
• A Yousefi, PG Lafleur and R Gauvin [148 references], Kinetic studies of thermoset cure reactions: a review, Polymer Composites, April 1997, 18(2), 157-168.
• Cure shrinkage
• DU Shah and PJ Schubel [27 references], Evaluation of cure shrinkage measurement techniques for thermosetting resins, Polymer Testing, September 2010, 29(6), 629-639.
• Cyanate ester resins
  • Treliant Fang and David A Shimp [265 references], Polycyanate esters: science and applications, Progress in Polymer Science, 1995, 20(1), 61-118.
• Damage tolerance
  • Derek Hull and Yi Bing Shi, Damage mechanism characterization in composite damage tolerance investigations, Composite Structures, 1993, 23(2), 99-120.
• Damping
• R Chandra, SP Singh and K Gupta [87 references], Damping studies in fibre-reinforced composites, Composite Structures, 1999, 46(1), 41-51.
• IC Finegan and RF Gibson [34 references], Recent research on enhancement of damping in polymer composites, Composite Structures, February-March 1999, 44(2-3), 89-98.
• RF Gibson and DG Wilson, Dynamic mechanical properties of fiber-reinforced composite materials, The Shock and Vibration Digest, 1979, 11(10), 3–11.
• RF Gibson and RA Plunkett, Dynamic stiffness and damping of fiber-reinforced composite materials, The Shock and Vibration Digest, 1977, 9(2), 9–17.
• Data mining
  • M Perzyk, R Biernacki and J Kozlowski [27 references], Data mining in manufacturing: significance analysis of process parameters, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2008, 222(11), 1503-1516.
• Debonding
• R Dodds [39 references], Transverse fibre debonding in reinforced thermosets - a review. Part 1 - initiation of transverse fibre debonding, RAPRA Members Journal, May/June 1976, 4(3), 49-56.
• Defects
  • John Summerscales [56 references], Manufacturing defects in fibre-reinforced plastics composites, Insight, December 1994, 36(12), 936-942.
  • WJ Cantwell and J Morton [83 references], The significance of damage and defects and their detection in composite materials: a review, Journal of Strain Analysis, 1992, 27(1), 29-42.
  • RB Heslehurst and M Scott, Review of defects and damage pertaining to composite aircraft components, Composite Polymers, 1990, 3(2), 103-133.
• Degradable polymers - standards and certification
  • Andrej Krzan, S Hemjinda, S Miertus, A Corti and E Chiellini [24 references], Standardization and certification in the area of environmentally degradable plastics, Polymer Degradation and Stability, December 2006, 91(12), 2819-2833.
• Degradation-induced embrittlement
  • Bruno Fayolle, Emmanuel Richaud, Xavier Colin and Jacques Verdu, Review: degradation-induced embrittlement in semi-crystalline polymers having their amorphous phase in rubbery state, Journal of Materials Science, November 2008, 43(22), 6999-7012.
• Delamination
• AC Garg [136 references], Delamination - a damage mode in composite structures, Engineering Fracture Mechanics, 1988, 29(5), 557-584.
• Design codes and optimisation
• S Jeong and K Shimoyama [70 references], Review of data mining for multi-disciplinary design optimization, Proceedings of the Institution of Mechanical Engineers Part G: Aerospace Engineering, 2011, 225(5), 469-480.
• R Fico, A Prota and G Manfredi [51 references], Assessment of Eurocode-like design equations for the shear capacity of FRP RC members, Composites Part B: Engineering, 2008, 39(5), 792-806.
• S Adali [175 references], Chapter 1; Design optimization of composite laminates under deterministic and uncertain conditions, pages 1-55 in GO Shonaike and SG Advani (editors): Advanced Polymeric Materials - Structure Property Relationships, CRC Press LLC, Boca Raton FL, 2003.   ISBN 1-58716-047-1.
• JL Clarke (editor), Structural Design of Polymers and Composites: EUROCOMP design code handbook, E&FN Spon (Chapman and Hall), London, 1996. ISBN 0-419-19450-9.
• Dielectric measurements
  • LH Garden, D Hayward and RA Pethrick, Dielectric non-destructive testing approach to cure monitoring of adhesives and composites, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, August 2007, 221(4), 521-533.
  • RA Pethrick and D Hayward [153 references], Real time dielectric relaxation studies of dynamic polymeric systems, Progress in Polymer Science, 2002, 27(9), 1983-2017.
  • Koji Asami [119 references], Characterization of heterogeneous systems by dielectric spectroscopy, Progress in Polymer Science, 2002, 27(8), 1617-1659.
  • PR Ciriscioli and GS Springer [20 references], Dielectric cure monitoring - a critical review, SAMPE Journal, May-June 1989, 25, 35-42.
• Digital Image Correlation
• F Hild and S Roux [61 references], Digital image correlation: from displacement measurement to identification of elastic properties - a review, Strain, May 2006, 42(2), 69-80.
• YF Sun and YM Tan, JHL Pang and F Su, Digital image correlation and its applications in electronics packaging, Proceedings of the 7th Electronics Packaging Technology conference, 2005, v1/2, 129-134.
• Digital manufacturing
  • G Chryssolouris, D Mavrikios, N Papakostas, D Mourtzis, G Michalos and K Georgoulias [67 references], Digital manufacturing: history, perspectives and outlook, Proceedings of IMechE Part B: Journal of Engineering Manufacture, 2009, 223(5), 451-462.
• Durability
• AS Maxwell, WR Broughton, G Dean, GD Sims [84 references], Review of accelerated ageing methods and lifetime prediction techniques for polymeric materials, National Physical Laboratory report DEPC MPR 016, March 2005.
• I Sevostianov, NK Sookay, CJ von Klemperer and VE Verijenko [12 references], Environmental degradation using functionally graded material approach, Composite Structures, 2003, 62(3-4), 417-421.
• TJ Searle and J Summerscales [115 references], Review of the durability of marine laminates, Chapter 7 in G Pritchard (editor): "Reinforced Plastics Durability", Woodhead, Cambridge, 1998, pp 219-266.
• Kin Liao, CR Schultheisz, DL Hunston and LC Brinson [402 references], Long-term durability of fiber-reinforced polymer matrix composite materials for infrastructure applications, Journal of Advanced Materials, October 1998, 30(4), 3-40.
• JM Hutchinson [229 references], Physical aging of polymers, Progress in Polymer Science, 1995, 20(4), 703-760.
• CL Schutte, Environmental durability of glass-fiber composites, Materials Science and Engineering R: Reports, 15 November 1994, 13(7), 256-324.
• Dynamics
  • MS Qatu, RW Sullivan and W Wang [199 references], Recent research advances on the dynamic analysis of composite shells: 2000–2009, Composite Structures, December 2010, 93(1), 14-31.
  • Mallikarjuna and T Kant [143 references], A critical review and some results of recently developed refined theories of fiber-reinforced laminated composites and sandwiches, Composite Structures, 1993, 23(4), 293-312.
• Earthquake/seismic loading
  • Wei Li, Qing-ning Li, Wei-shan Jiang, Lei Jiang [47 references], Seismic performance of composite reinforced concrete and steel moment frame structures: state-of-the-art, Composites Part B: Engineering, March 2011, 42(2), 190-206.
• Electroactive polymers
  • Y Bar-Cohen, Electroactive polymers as an enabling materials technology, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, August 2007, 221(4), 553-564.
• Electronic speckle pattern interferometry
• A Mujeeb, VU Nayar and VR Ravindran [83 references], Electronic Speckle Pattern Interferometry techniques for non-destructive evaluation: a review, Insight, May 2006, 48(5), 275-281.
• Electrorheological polymers
  • J Akhavan, Electro-rheological polymers, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, August 2007, 221(4), 577-587.
• Electrospinning
• J-H He, Y Liu and L Xu, Apparatus for preparing electrospun nanofibres: a comparative review, Materials Science and Technology, November 2010, 26(11), 1275-1287.
• Darrell H Reneker and Alexander L. Yarin [68 references], Electrospinning jets and polymer nanofibers, Polymer, 13 May 2008, 49(10), 2387-2425.
• Environmental degradation
  • Andrej Krzan, Sarunya Hemjinda, Stanislav Miertus, Andrea Corti, and Emo Chiellini [24 references], Standardization and certification in the area of environmentally degradable plastics, Polymer Degradation and Stability, December 2006, 91(12), 2819-2833.
• Enzymes
  • DR Kashyap, PK Vohra, S Chopra and R Tewari [77 references], Applications of pectinases in the commercial sector: a review, Bioresource Technology, May 2001, 77(3), 215-227.
• Erosion
• NM Barkoula and J Karger-Kocsis, Processes and influencing parameters of the solid particle erosion of polymers and their composites, Journal of Materials Science, 2002, 37(18), 3807 – 3820.
• Failure (see also buckling, debonding, defects, delamination and fracture)
• U Icardi and L Ferrero, A comparison among several recent criteria for the failure analysis of composites, Journal of Advanced Materials (Covina), 2008, 40(4), 73-111.
• AC Orifici, I Herszberg and RS Thomson [89 references], Review of methodologies for composite material modelling incorporating failure, Composite Structures, November 2008, 86(1-3), 194-210.
• AO Addin, SM Sapuan, E Mahdi and M Othman [51 references], Prediction and detection of failures in laminated composite materials using neural networks - a review, Polymers and Polymer Composites, 2006, 14(4), 433-441.
• LN McCartney [57 references], Physically based damage models for laminated composites, Proceedings of the Institution of Mechanical Engineers - Part L: Journal of Materials: Design & Applications, 2003, 217(3), 163-199.
• T Kant and K Swaminathan [99 references], Estimation of transverse/interlaminar stresses in laminated composites: a selective review and survey of current developments, Composite Structures, 2000, 49(1), 65-75.
• MR Piggott [29 references], The effect of fibre waviness on the mechanical properties of unidirectional fibre composites: a review, Composites Science and Technology, 1995, 53(2), 201-205.
• Kimberley Dransfield, Caroline Baillie and Yiu-Wing Mai, Improving the delamination resistance of CFRP by stitching—a review, Composites Science and Technology, 1994, 50(3), 305-317.
• AC Garg and Yiu-Wing Mai, Failure mechanisms in toughened epoxy resins: a review, Composites Science and Technology, 1988, 31(3), 179-223.
• Fatigue
• A Fatemi and N Shamsaei [51 references], Multiaxial fatigue: an overview and some approximation models for life estimation, International Journal of Fatigue, August 2011, 33(8), 948-958.
• J Papuga [61 references], A survey on evaluating the fatigue limit under multiaxial loading, International Journal of Fatigue, February 2011, 33(2), 153-165.
• MF Horstemeyer, D Farkas, S Kim, T Tang and G Potirniche [82 references], Nanostructurally small cracks (NSC): a review on atomistic modeling of fatigue, International Journal of Fatigue, September 2010, 32(9), 1473-1502.
• VA Passipoularidis and TP Philippidis [39 references], A study of factors affecting life prediction of composites under spectrum loading, International Journal of Fatigue, March 2009, 31(3), 408-417.
• René Alderliesten and Calvin Ransa [54 references], The meaning of threshold fatigue in fibre metal laminates, International Journal of Fatigue, February 2009, 31(2), 213-222.
• NL Post, SW Case and J.J. Lesko [136 references], Modeling the variable amplitude fatigue of composite materials: a review and evaluation of the state of the art for spectrum loading, International Journal of Fatigue, December 2008, 30(12), 2064-2086.
• WW Stinchcomb, and KL Reifsnider, Fatigue damage mechanisms in composite materials: a review, ASTM STP675 Fatigue Mechanisms, American Society for Testing and Materials, 1979, 762-787.
• Fibre clustering
  • DR Mulligan, SL Ogin, PA Smith, GM Wells and CM Worrall [39 references], Fibre-bundling in a short-fibre composite, Composites Science and Technology, 2003, 63(5), 715-725.
• Fibre pull-out test
• Célene DiFrancia, TC Ward and RO Claus [75 references], The single-fibre pull-out test, 1: review and interpretation, Composites Part A: Applied Science and Manufacturing, 1996, 27(8), 597-612.
• Fibre reinforced cement and concrete
  • Andrzej M. Brandt [17 references], Fibre reinforced cement-based (FRC) composites after over 40 years of development in building and civil engineering, Composite Structures, November 2008, 86(1-3), 3-9.
  • Zhihong Zheng and Dorel Feldman [102 references], Synthetic fibre-reinforced concrete, Progress in Polymer Science, 1995, 20(2), 185-210.
• Fibre waviness
• MR Piggott [29 references], The effect of fibre waviness on the mechanical properties of unidirectional fibre composites: a review, Composites Science and Technology, 1995, 53(2), 201-205.
• Filament winding
• M Munro, A review of manufacturing of fiber composite components by filament winding, Polymer Composites, October 1988, 9(5), 352-359.
• Finite element analysis
• E Carrera, F Miglioretti, M Petrolo [43 references], Accuracy of refined finite elements for laminated plate analysis, Composite Structures, April 2011, 93(5), 1311-1327.
• A Chakrabarti, HD Chalak, MdA Iqbal and AH Sheikh [36 references], A new FE model based on higher order zigzag theory for the analysis of laminated sandwich beam with soft core, Composite Structures, January 2011, 93(2), 271-279.
• T-P Fries and T Belytschko [207 references], The extended/generalized finite element method: an overview of the method and its applications, International Journal for Numerical Methods in Engineering, 15 October 2010, 84(3), 253–304.
• YX Zhang and CH Yang [119 references], Recent developments in finite element analysis for laminated composite plates, Composite Structures, March 2009, 88(1), 147-157.
• MQ Nguyen, DJ Elder, J Bayandor, RS Thomson and ML Scott [11 references], A review of explicit finite element software for composite impact analysis, Journal of Composite Materials, February 2005, 39(4), 375-386.
• Fillers
  • DR Paul and JE Mark [134 references], Fillers for polysiloxane (“silicone”) elastomers, Progress in Polymer Science, July 2010, 35(7), 893-901.
• Fire (including flame, smoke and toxicity)
• DJ Kind and TR Hull [70 references], A review of candidate fire retardants for polyisoprene, Polymer Degradation and Stability, March 2012, 97(3), 201-213.
• ED Weil [173 references], Fire-protective and flame-retardant coatings: a state-of-the-art review, Journal of Fire Sciences, May 2011, 29(3), 259-296.
• LA Hollingbery and TR Hull [93 references], The fire retardant behaviour of huntite and hydromagnesite – a review, Polymer Degradation and Stability, December 2010, 95(12), 2213-2225.
• Li Chen and Y-Z Wang [267 references], A review on flame retardant technology in China. Part I: development of flame retardants, Polymers Advanced Technologies, 2010, 21(1), 1-26.
• P Kiliaris and CD Papaspyrides [251 references], Polymer/layered silicate (clay) nanocomposites: an overview of flame retardancy, Progress in Polymer Science, July 2010, 35(7), 902-958.
• AP Mouritz, S Feih, E Kandare, Z Mathys, AG Gibson, PE Des Jardin, SW Case and BY Lattimer [148 references], Review of fire structural modelling of polymer composites, Composites Part A: Applied Science and Manufacturing, December 2009, 40(12), 1800-1814.
• Flax fibres
  • A Stamboulis, CA Baillie and T Peijs, Effects of environmental conditions on mechanical and physical properties of flax fibers, Composites Part A: Applied Science and Manufacturing, August 2001, 32(8), 1105-1115.
  • HSS Sharma, PC Mercer and AE Brown, A review of recent research on the retting of flax in Northern Ireland, International Biodeterioration, 1989, 25(5), 327-342.
• Foams
• C Betts [32 references], Benefits of metal foams and developments in modelling techniques to assess their materials behaviour: a review, Materials Science and Technology, February 2012, 28(2), 129-143.
• M Sauceau, J Fages, A Common, C Nikitine and E Rodier [105 references], New challenges in polymer foaming: a review of extrusion processes assisted by supercritical carbon dioxide, Progress in Polymer Science, June 2011, 36(6), 749-766.
• Uttam Kumar Chakravarty [42 references], An investigation on the dynamic response of polymeric, metallic and biomaterial foams, Composite Structures, September 2010, 92(10), 2339-2344.
• Fractal dimension and lacunarity
  • G Landini [10 references], Fractals in microscopy, Journal of Microscopy, January 2011, 241(1), 1-8.
  • P Dong [37 references], Lacunarity analysis of raster datasets and 1D, 2D, and 3D point patterns, Computers and Geosciences, October 2009, 35(10), 2100-2110.
  • J Summerscales, FJ Guild, NRL Pearce and PM Russell [43 references], Voronoi cells, fractal dimensions and fibre composites, Journal of Microscopy, February 2001, 201(2), 153-162.
  • B Klinkenberg [98 references], A review of methods used to determine the fractal dimension of linear features, Mathematical Geology, 1994, 26(1), 23-46.
  • T Xu, ID Moore and JC Gallanta [70 references], Fractals, fractal dimensions and landscapes - a review, Geomorphology, December 1993, 8(4), 245-262.
  • CD Cutler, A review of the theory and estimation of fractal dimension, In H Tong (editor), Dimension Estimation and Models, World Scientific, Singapore, 1993, 1-107.
  • TG Smith, GD Lange and WB Marks [31 references], Fractal methods and results in cellular morphology - dimensions, lacunarity and multifractals, Journal of Neuroscience Methods, November 1996, 69(2), 123-136.
  • BB Mandelbrot, The Fractal Geometry of Nature, WH Freeman, Sans Francisco, 1982. ISBN 0-7167-1186-9.
• Fracture
• RAC Deblieck, DJM van Beek, K Remerie and IM Ward [94 references], Failure mechanisms in polyolefines: the role of crazing, shear yielding and the entanglement network, Polymer, 22 June 2011, 52(14), 2979-2990.
• T Bárány, T Czigány and J Karger-Kocsis [285 references], Application of the essential work of fracture (EWF) concept for polymers, related blends and composites: a review, Progress in Polymer Science, October 2010, 35(10), 1257-1287.
• JG Williams [15 references], Fracture mechanics of composites failure, Proceedings of the Institution of Mechanical Engineers C: Journal of Mechanical Engineering Sciences, 1990, 204, 209-218.
• Fracture toughness
• MJ Laffan, ST Pinho, P Robinson and AJ McMillan [59 references], Translaminar fracture toughness testing of composites: a review, Polymer Testing, May 2012, 31(3), 481-489.
• Jang-Kyo Kim and Yiu-Wing Mai [234 references], High strength, high fracture toughness fibre composites with interface control – a review, Composites Science and Technology, 1991, 41(4), 333-378.
• Jung Ju Lee [27 references], Evaluation and analysis of interlaminar fracture toughness of bead filled matrix hybrid composite materials using orthotropic fracture mechanics, Composite Structures, 1995, 32(1-4), 477-489.
• Functionally graded materials (FGM)
• J Zhu, GR Ye, YQ Xiang and WQ Chen [29 references], Recursive formulae for wave propagation analysis of FGM elastic plates via reverberation-ray matrix method, Composite Structures, January 2011, 93(2), 259-270.
• Fungal deterioration
• D Montegut, N Indictor and RJ Koestler [83 references], Fungal deterioration of cellulosic textiles: a review, International Biodeterioration, 1991, 28(1-4), 209-226.
• Furan resins
  • Alessandro Gandini and Mohamed Naceur Belgacem [324 references], Furans in polymer chemistry, Progress in Polymer Science, 1997, 22(6), 1203-1379.
• Glass
  • Reinhard Conradt [104 references], Chemical durability of oxide glasses in aqueous solutions: a review, Journal of the American Ceramic Society, 2008, 91(3), 728–735.
• Glass ceramics
  • Linda R Pinckney and George H Beall [22 references], Microstructural evolution in some silicate glass–ceramics: a review, Journal of the American Ceramic Society, 2008, 91(3), 773–779.
  • RD Rawlings, JP Wu and AR Boccaccini, Glass-ceramics: their production from wastes - a review, Journal of Materials Science, February 2006, 41(3), 733-761.
• Graphene

• JR Potts, DR Dreyer, CW Bielawski and RS Ruoff [299 references], Graphene-based polymer nanocomposites, Polymer, 7 January 2011, 52(1), 5-25

• T Kuilla, S Bhadra, D Yao, NH Kim, S Bose and JH Lee [223 references], Recent advances in graphene based polymer composites, Progress in Polymer Science, November 2010, 35(11), 1350-1375.
• Graphite
• R Sengupta, M Bhattacharya, S Bandyopadhyay and AK Bhowmick [151 references], A review on the mechanical and electrical properties of graphite and modified graphite reinforced polymer composites, Progress in Polymer Science, May 2011, 36(5), 638-670.
• DD Chung [185 references], Review: Graphite, Journal of Materials Science, 2002, 37(8), 1475-1489
• Halpin-Tsai equations
• JC Halpin and JL Kardos [18 references], The Halpin-Tsai equations: a review, Polymer Engineering and Science, May 1976, 16(5), 344-352.
• Holographic interferometry
  • RB Heslehurst, A review of holographic interferometry investigations of defects and damage in composite materials, Journal of Advanced Materials (Covina), 2009, 41(1), 5-12.
• Hybrid composites
  • KM Hardaker and MOW Richardson, Trends in hybrid composite technology, Polymer-Plastics Technology and Engineering, 1980, 15(2), 169 – 182.
  • D Short and J Summerscales [33 references], Hybrids - a review, part 2: physical properties, Composites, January 1980, 11(1), pages 33-38.
  • D Short and J Summerscales [44 references], Hybrids - a review, part 1: techniques, design and construction, Composites, October 1979, 10(4), 215-221.
  • J Summerscales and D Short [61 references], Carbonfibre and glassfibre hybrid reinforced plastics, Composites, July 1978, 9(3), pages 157-166.
• Hydrostatic pressure
• CPR Hoppel, TA Bogetti and JW Gillespie, Literature review - effects of hydrostatic pressure on the mechanical behavior of composite materials, Journal of Thermoplastic Composite Materials, October 1995, 8(4), 375-409.
• Image processing and analysis
  • RJ Radke, S Andra, O Al-Kofahi and B Roysam [127 references], Image change detection algorithms: a systematic survey, IEEE Transactions on Image Processing, March 2005, 14(3), 294-307.
  • FJ Guild and J Summerscales [132 references], Microstructural image analysis applied to fibre composite materials, Composites, 1993, 24(5), 383-394.
• Impact
• SD Bartus and UK Vaidya, A review: impact damage of composite materials, Journal of Advanced Materials, 2007, 39(3), 3-21.
• DJ Elder, RS Thomson, MQ Nguyen and ML Scott [24 references], Review of delamination predictive methods for low speed impact of composite laminates, Composite Structures, October-December 2004, 66(1-4), 677-683.
• BA Cheeseman and TA Bogetti [62 references], Ballistic impact into fabric and compliant composite laminates, Composite Structures, July 2003, 61(1-2), 161-173.
• MOW Richardson and MJ Wisheart [79 references], Review of low velocity impact properties of composite materials, Composites, 1996, A27(12), 1123-1131.
• GA Bibo and PJ Hogg [221 references], The role of reinforcement architecture on impact damage mechanisms and post-impact compression behaviour, Journal of Materials Science, 1 March 1996, 31(5), 1115-1137.
• WJ Cantwell and J Morton [106 references], The impact resistance of composite materials - a review, Composites, September 1991, 22(5), 347-362.
• In-situ polymerisation of thermoplastic polymers during composite manufacture
  • K van Rijswijk and HEN Bersee [143 references], Reactive processing of textile fiber-reinforced thermoplastic composites - an overview, Composites Part A: Applied Science and Manufacturing March 2007, 38(3), 666-681.
• Indentation
• BR Lawn and RF Cook [187 references], Probing material properties with sharp indenters: a retrospective, Journal of Materials Science, 2012, 47(1), 1-22.
• Injection moulding
• H Mavridis, AN Hrymak and J Vlachopoulos [86 references], Mathematical modelling of injection mould filling, Advances in Polymer Technology, 1986, 6(4), 457-466.
• Inorganic fibres
• Theodore F Cooke, Inorganic fibres - a literature review, Journal of the American Ceramics Society, 1991, 74(12), 2959-2978.
• Interfaces
• Zhan Chen [198 references], Investigating buried polymer interfaces using sum frequency generation vibrational spectroscopy, Progress in Polymer Science, November 2010, 35(11), 1376-1402.
• A Bergeret, L Ferry and P Ienny [36 references], Influence of the fibre/matrix interface on ageing mechanisms of glass fibre reinforced thermoplastic composites (PA66, PET, PBT) in a hygrothermal environment, Polymer Degradation and Stability, September 2009, 94(9), 1315-1324.
• LT Drzal, PJ Herrera-Franco and Henjen Ho [117 references]. Fibre-Matrix Interface Tests, Chapter 5 in A Kelly and C Zweben - editors, Comprehensive Composite Materials volume 5, Pergamon, Oxford, 2000, 71-111.  ISBN 0-08-043723-0.
• MC Andrews, DJ Bannister and RJ Young [72 references], The interfacial properties of aramid epoxy model composites, Journal of Materials Science, 1 August 1996, 31(15), 3893-3913.
• Jang-Kyo Kim and Yiu-wing Mai, High strength, high fracture toughness fibre composites with interface control: a review, Composites Science and Technology, 1991, 41(4), 333-378.
• JDH Hughes, The carbon fibre/epoxy interface: a review, Composites Science and Technology, 1991, 41(1), 13-45.
• DL Caldwell [68 references], Interfacial analysis, In SM Lee - editor, Encyclopaedia of Composites, VCH Publishers, New York, 1990, volume 2, 361-377.  ISBN 0-89573-732-9.
• Interphases
  • J Jancar [53 references], Review of the role of the interphase in the control of composite performance on micro- and nano-length scales, Journal of Materials Science, October 2008, 43(20), 6747-6757.
  • ST Mileiko [15 references], Interphases, Chapter 4.09.2.3 in A Kelly and C Zweben - editors, Comprehensive Composite Materials volume 4, Pergamon, Oxford, 2000, 268-270.  ISBN 0-08-042993-9.
  • WD Bascom [44 references], Interphase in fiber-reinforced composites, In SM Lee - editor, Encyclopaedia of Composites, VCH Publishers, New York, 1990, volume 2, 411-422. ISBN 0-89573-732-9.
• Joints in composites
• ST Amancio-Filho and JF dos Santos, [113 references], Joining of polymers and polymer-metal hybrid structures: recent developments and trends, Polymer Engineering and Science, 2009, 49(8), 1461-1476.
• SD Thoppul, J Finegan, RF Gibson [140 reference], Mechanics of mechanically fastened joints in polymer–matrix composite structures - a review, Composites Science and Technology, 2009, 69(3-4), 301-329.
• João Custódio, James Broughton and Helena Cruz [80 references], A review of factors influencing the durability of structural bonded timber joints, International Journal of Adhesion and Adhesives, March 2009, 29(2), 173-185.
• M-L Dano, E Kamal and G Gendron [28 references], Analysis of bolted joints in composite laminates: strains and bearing stiffness predictions, Composite Structures, August 2007, 79(4), 562-570.
• PP Camanho and FL Matthews [90 references], Stress analysis and strength prediction of mechanically fastened joints in FRP: a review, Composites Part A: Applied Science and Manufacturing, 1997, 28(6), 529-547.
• FL Matthews, PF Kilty and EW Godwin - A review of the strength of joints in fibre-reinforced plastics. Part 2. Adhesively bonded joints, Composites, 1980, 13(1), 29-37.
• EW Godwin and FL Matthews - A review of the strength of joints in fibre-reinforced plastics : Part 1. Mechanically fastened joints, Composites, 1980, 11(3), 155-160.
• Knitted reinforcement
• S Rebouillat, B Steffenino and A Miret-Casas [28 references], Aramid, steel, and glass: characterization via cut performance testing, of composite knitted fabrics and their constituent yarns, with a review of the art, Journal of Materials Science, 2010, 45(19), 5378-5392.
• KH Leong, S Ramakrishna, ZM Huang and GA Bibo [113 references], The potential of knitting for engineering composites – a review, Composites Part A: Applied Science and Manufacturing, 2000, A31(3), 197-220.
• Zhenming Huang and S Ramakrishna [68 references], Micromechanical modelling approaches for the stiffness and strength of knitted fabric composites – a review and comparative study, Composites Part A: Applied Science and Manufacturing, 2000, A31(5), 479-501.
• Laminate optimisation
• H Ghiasi, D Pasini and L Lessard [139 references], Optimum stacking sequence design of composite materials Part I: constant stiffness design, Composite Structures, September 2009, 90(1), 1-11.
• H Ghiasi, K Fayazbakhsh, D Pasini and L Lessard [118 references], Optimum stacking sequence design of composite materials Part II: variable stiffness design, Composite Structures, December 2010, 93(1), 1-13.
• Laminate theory
  • JN Reddy, An evaluation of equivalent-single-layer and layerwise theories of composite laminates, Composite Structures, 1993, 25(1-4), 21-35.
  • Mallikarjuna and T Kant, A critical review and some results of recently developed refined theories of fiber-reinforced laminated composites and sandwiches, Composite Structures, 1993, 23(4), 293-312.
• Life cycle assessment
• M Weiss, J Haufe, M Carus, M Brandão, S Bringezu, B Hermann and MK Patel [91 references], A review of the environmental impacts of biobased materials, Journal of Industrial Ecology, April 2012, 16(S1), S169–S181.
• Li Shen and MK Patel [46 references], Life cycle assessment of polysaccharide materials: a review, Journal of Polymers and the Environment, April 2008, 16(2), 154-167.
• Lignocellulosic nanocomposites
• S Kamel, Nanotechnology and its applications in lignocellulosic composites - a mini review, eXPRESS Polymer Letters, 2007, 1(9), 546–575.
• Liquid crystal polymers
• AA Collyer [82 references], Thermotropic liquid crystal polymers for engineering applications, Materials Science and Technology, April 1989, 5(x), 309-322.
• CL Jackson and MT Shaw [215 references], Liquid crystal polymers, Polymer liquid crystalline materials, International Materials Reviews, 1991, 36(5), 165-186.
• C Carfagna, E Amendola and M Giamberini [103 references], Liquid crystalline epoxy based thermosetting polymers, Progress in Polymer Science, 1997, 22(8), 1607-1647.
• Liquid phase sintering
• Randall M German, Pavan Suri and Seong Jin Park [230 references], Review: liquid phase sintering, Journal of Materials Science, January 2009, 44(1), 1-39.
• Machining
• C Artini, ML Muolo and A Passerone [65 references], Diamond–metal interfaces in cutting tools: a review, Journal of Materials Science, 2012, 47(7), 3252-3264.
• DeFu Liu, YongJun Tang and WL Cong [117 references], A review of mechanical drilling for composite laminates, Composite Structures, March 2012, 94(4), 1265-1279.
• VS Sharma, M Dogra and NM Suri, Advances in the turning process for productivity improvement - a review, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2008, 222(11), 1417-1442.
• GM Robinson, MJ Jackson and MD Whitfield, A review of machining theory and tool wear with a view to developing micro and nano machining processes, Journal of Materials Science, March 2007, 42(6), 2002-2015.
• S Gordon and MT Hillery [52 references], A review of the machining of composite materials, Proc IMechE Part L: Journal of Materials Design and Applications, 2003, L217(1), 35-45.
• S Abrate and DA Walton [44 references], Machining of composite materials. Part 1: traditional methods, Composites Manufacturing, 1992, 3(2), 75-83.
• S Abrate and D Walton [46 references], Machining of composite materials. Part 2: non-traditional methods, Composites Manufacturing, 1992, 3(2), 85-94.
• Magnetorheological fluid devices
  • J Wang and G Meng [54 references], Magnetorheological fluid devices: principles, characteristics and applications in mechanical engineering, Proceedings of the Institution of Mechanical Engineers L: Journal of Materials: Design & Applications, 2001, 215(3), 165-174.
• Mechanics of polymer composites
• CC Chamis [67 references], Polymer composite mechanics review — 1965 to 2006, Journal of Reinforced Plastics and Composites, July 2007, 26(10), 987 - 1019.
• Meshless methods
• KM Liew, X Zhao and AJM Ferreira [273 references], A review of meshless methods for laminated and functionally graded plates and shells, Composite Structures, July 2011, 93(8), 2031-2041.
• Metal matrix composites
• N Chawla and KK Chawla, Microstructure-based modelling of the deformation behavior of particle reinforced metal matrix composites, Journal of Materials Science, February 2006, 41(3), 913-925.
• Hai Zhi Ye and Xing Yang Liu, Review of recent studies in magnesium matrix composites, Journal of Materials Science, October 2004, 39(20), 6153-6171.
• A Mortensen and I Jin [454 references], Solidification processing of metal matrix composites, International Materials Reviews, 1992, 37(3), 101-128. IMR/235.
• A Turnbull [33 references], Review of corrosion studies on aluminium metal matrix composites, British Corrosion Journal, 1992, 27(1), 27-35.
• IA Ibrahim, FA Mohamed and EJ Lavernia [127 references], Particulate metal matrix composites – a review, Journal of Materials Science, 1 March 1991, 26(5), 1137-1156.
• Metrology
• GN Peggs, PG Maropoulos, EB Hughes, AB Forbes, S Robson, M Ziebart and B Muralikrishnan, Recent developments in large-scale dimensional metrology, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2009, 223(6), 571-596.
• Micromechanics
  • M-J Pindera, H Khatam, AS Drago and Y Bansal [164 references], Micromechanics of spatially uniform heterogeneous media: a critical review and emerging approaches, Composites Part B: Engineering, July 2009, 40(5), 349-378.
• Microscopy
• M Schoßig, A Zankel, C Bierögel, P Pölt, W Grellmann [35 references], ESEM investigations for assessment of damage kinetics of short glass fibre reinforced thermoplastics – results of in situ tensile tests coupled with acoustic emission analysis, Composites Science and Technology, 7 February 2011, 71(3), 257-265.
• DB Hovis and AH Heuer [31 references], The use of laser scanning confocal microscopy (LSCM) in materials science, Journal of Microscopy, December 2010, 240(3), 173–180.
• KL McDonald [22 references], A review of high-pressure freezing preparation techniques for correlative light and electron microscopy of the same cells and tissues, Journal of Microscopy, 2009, 235(3), 273-281.
• FJ Guild and J Summerscales [132 references], Microstructural image analysis applied to fibre composite materials, Composites, 1993, 24(5), 383-394.
• J Summerscales, FJ Guild, NRL Pearce and PM Russell [43 references], Voronoi cells, fractal dimensions and fibre composites, Journal of Microscopy, February 2001, 201(2), 153-162.
• Microwaves
• ET Thostenson and T-W Chou [94 references], Microwave processing: fundamentals and applications, Composites Part A: Applied Science and Manufacturing, 1999, A30(9), 1055-1071.
• ASY Leong and RT Sormunen [100 references], Microwave procedures for electron microscopy and resin-embedded sections, Micron, 1998, 29(5), 397-409.
• J Jacob, LHL Chia and FYC Boey [73 references], Thermal and non-thermal interaction of microwave radiation with materials, Journal of Materials Science, 1 November 1995, 30(21), 5321-5327.
• Moisture content
  • J Summerscales [52 references], Non-destructive measurement of the moisture content in fibre-reinforced plastics, British Journal of Non-Destructive Testing, February 1994, 36(2), 64-72.
• Multi-functional composites
  • RF Gibson [182 references], A review of recent research on mechanics of multifunctional composite materials and structures, Composite Structures, November 2010, 92(12), 2793-2810.
• Multi-scale structure
• G Chinga-Carrasco [213 references], Exploring the multi-scale structure of printing paper: a review of modern technology, Journal of Microscopy, 2009, 234(3), 211-242.
• Nanoadditives
• L Reijnders [164 references], Human health hazards of persistent inorganic and carbon nanoparticles, Journal of Materials Science, 2012, 47(13), 5061-5073.
• AP Kumar, D Depan, NS Tomer and RP Singh, Nanoscale particles for polymer degradation and stabilization - trends and future perspectives, Progress in Polymer Science, June 2009, 34(6), 479-515.
• Nanocomposites
• N Roy, R Sengupta and AK Bhowmick [358 references], Modifications of carbon for polymer composites and nanocomposites, Progress in Polymer Science, June 2012, 37(6), 781-819.
• Yong Du, SZ Shen, Kefeng Cai and PS Casey [119 references], Research progress on polymer–inorganic thermoelectric nanocomposite materials, Progress in Polymer Science, June 2012, 37(6), 820-841.
• AK Mishra, S Bose, T Kuila, NH Kim and JH Lee [186 references], Silicate-based polymer-nanocomposite membranes for polymer electrolyte membrane fuel cells, Progress in Polymer Science, June 2012, 37(6), 842-869.
• H Nolte and A Kwade [19 references], Effect of kneading process conditions on the particle fineness and the polydispersity in nanocomposites, Composites Science and Technology, 21 May 2012, 72(9), 939-947.
• H Nolte, C Schilde and A Kwade [45 references], Determination of particle size distributions and the degree of dispersion in nanocomposites, Composites Science and Technology, 21 May 2012, 72(9), 948-958.
• MH Al-Saleh and Uttandaraman Sundararaj [136 references], Review of the mechanical properties of carbon nanofiber/polymer composites, Composites Part A: Applied Science and Manufacturing, December 2011, 42(12), 2126-2142.
• Bin Li and Wei-Hong Zhong [110 references], Review on polymer/graphite nanoplatelet nanocomposites, Journal of Materials Science, September 2011, 46(17), 5595-5614.
• JP Rao and KE Geckeler [274 references], Polymer nanoparticles: Preparation techniques and size-control parameters, Progress in Polymer Science, July 2011, 36(7), 887-913.
• BP Tripathi and VK Shahi [371 references], Organic–inorganic nanocomposite polymer electrolyte membranes for fuel cell applications, Progress in Polymer Science, July 2011, 36(7), 945-979.
• Xiaofeng Lu, Wanjin Zhang, Ce Wang, Ten-Chin Wen and Yen Wei [352 references], One-dimensional conducting polymer nanocomposites: synthesis, properties and applications, Progress in Polymer Science, May 2011, 36(5), 671-712.
• K Kabiri, H Omidian, MJ Zohuriaan-Mehr and S Doroudiani [145 references], Superabsorbent hydrogel composites and nanocomposites: a review, Polymer Composites, 2011, 32(2), 277-289.
• H Dieringa, Properties of magnesium alloys reinforced with nanoparticles and carbon nanotubes: a review, Journal of Materials Science, 2011, 46(2), 289-306
• J Jancar, JF Douglas, FW Starr, SK Kumar, P Cassagnau, AJ Lesser, SS Sternstein and MJ Buehler [186 references], Current issues in research on structure–property relationships in polymer nanocomposites, Polymer, 8 July 2010, 51(15), 3321-3343.
• P Kiliaris and CD Papaspyrides [251 references], Polymer/layered silicate (clay) nanocomposites: an overview of flame retardancy, Progress in Polymer Science, July 2010, 35(7), 902-958.
• NG Sahoo, S Rana, JW Cho, L Li and SH Chan [371 references], Polymer nanocomposites based on functionalized carbon nanotubes, Progress in Polymer Science, July 2010, 35(7), 837-867.
• DR Paul and JE Mark [134 references], Fillers for polysiloxane (“silicone”) elastomers, Progress in Polymer Science, July 2010, 35(7), 893-901.
• A Ladhari, H Ben Daly, H Belhadjsalah, KC Cole and J Denault [29 references], Investigation of water absorption in clay-reinforced polypropylene nanocomposites, Polymer Degradation and Stability, April 2010, 95(4), 429-439.
• S Bose, RA Khare, P Moldenaers [221 references], Assessing the strengths and weaknesses of various types of pre-treatments of carbon nanotubes on the properties of polymer/carbon nanotubes composites: a critical review, Polymer, 2 March 2010, 51(5), 975-993.
• SJ Eichhorn, A Dufresne, M Aranguren, NE Marcovich, JR Capadona, SJ Rowan, C Weder, W Thielemans, M Roman, S Renneckar, W Gindl, S Veigel, J Keckes, H Yano, K Abe, M Nogi, AN Nakagaito, A Mangalam, J Simonsen, AS Benight, A Bismarck, LA Berglund and T Peijs, Current international research into cellulose nanofibres and nanocomposites, Journal of Materials Science, 2010, 45(1), 1-33.
• J Faucheu, C Gauthier, L Chazeau, J-Y Cavaillé, V Mellon and EB Lami [56 references], Miniemulsion polymerization for synthesis of structured clay/polymer nanocomposites: short review and recent advances, Polymer, 6 January 2010, 51(1), 6-17
• T-W Chou, L Gao, ET Thostenson, Z Zhang, J-H Byun [87 references], An assessment of the science and technology of carbon nanotube-based fibers and composites, Composites Science and Technology, January 2010, 70(1), 1-19.
• L Sun, RF Gibson, F Gordaninejad and J Suhr [250 references], Energy absorption capability of nanocomposites: a review, Composites Science and Technology, November 2009, 69(14), 2392-2409.
• A Allaoui and N El Bounia [27 references], How carbon nanotubes affect the cure kinetics and glass transition temperature of their epoxy composites? – a review. eXPRESS Polymer Letters, 2009, 3(9), 588-594.
• Perrine Bordes, Eric Pollet and Luc Avérous [193 references], Nano-biocomposites: biodegradable polyester/nanoclay systems, Progress in Polymer Science, February 2009, 34(2), 125-155.
• M Hetzer and D De Kee [70 references], Wood/polymer/nanoclay composites, environmentally friendly sustainable technology: a review, Chemical Engineering Research and Design, October 2008, 86(A10), 1083-1093.
• J Zhao, Y Fu and S Liu, Polyhedral Oligomeric Silsesquioxane (POSS)-modified thermoplastic and thermosetting nanocomposites: a review, Polymers and Polymer Composites, 2008, 16(8), 482-500.
• S Pavlidou and CD Papaspyrides [272 references], A review on polymer–layered silicate nanocomposites, Progress in Polymer Science, December 2008, 33(12), 1119-1198.
• DR Paul and LM Robeson [284 references], Polymer nanotechnology: nanocomposites, Polymer, 7 July 2008, 49(15), 3187-3204.
• QH Zeng, AB Yu and GQ Lu [315 references], Multiscale modelling and simulation of polymer nanocomposites, Progress in Polymer Science, February 2008, 33(2), 191-269.
• Nanocrystalline materials
  • CC Koch [71 references], Structural nanocrystalline materials: an overview, Journal of Materials Science, 2007, 42(5), 1403-1414.
  • IA Ovid'ko [80 references], Review of fracture processes in nanocrystalline materials, Journal of Materials Science, 2007, 42(5), 1694-1708.
• Nanofibre characterisation
• V Beachley and X Wen [226 references], Polymer nanofibrous structures: Fabrication, biofunctionalization, and cell interactions, Progress in Polymer Science, July 2010, 35(7), 868-892.
• EPS Tan and CT Lim [52 references], Mechanical characterization of nanofibers - a review, Composites Science and Technology, July 2006, 66(9), 1102-1108.
• Nanolithography
  • S Diegoli, CAE Hamlett, SJ Leigh, PM Mendes and JA Preece, Engineering nanostructures at surfaces using nanolithography, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, August 2007, 221(4), 589-629.
• Nanostructures
• G-D Fu, GL Li, KG Neoh and ET Kang [408 references], Hollow polymeric nanostructures - synthesis, morphology and function, Progress in Polymer Science, January 2011, 36(1), 127-167.
• Nanotube composites
• M Rahmat and P Hubert [137 references], Carbon nanotube–polymer interactions in nanocomposites: a review, Composites Science and Technology, 6 December 2011, 72(1), 72-84.
• Z Han and A Fina [333 references], Thermal conductivity of carbon nanotubes and their polymer nanocomposites: a review, Progress in Polymer Science, July 2011, 36(7), 914-944.
• P-C Ma, NA Siddiqui, G Marom and J-K Kim [204 references], Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: a review, Composites Part A: Applied Science and Manufacturing, October 2010, 41(10), 1345-1367.
• Z Spitalsky, D Tasis, K Papagelis and C Galiotis [488 references], Carbon nanotube–polymer composites: Chemistry, processing, mechanical and electrical properties, Progress in Polymer Science, March 2010, 35(3), 357-401.
• W Bauhofer and JZ Kovacs [121 references], A review and analysis of electrical percolation in carbon nanotube polymer composites, Composites Science and Technology, August 2009, 69(10), 1486-1498.
• BZ Jang and A Zhamu, Processing of nanographene platelets (NGPs) and NGP nanocomposites: a review, Journal of Materials Science, August 2008, 43(15), 5092-5101.
• J Suhr and NA Koratkar, Energy dissipation in carbon nanotube composites: a review, Journal of Materials Science, 2008, 43(13); 4370-4382.
• Li Chunyu, ET Thostenson and Tsu-Wei Chou [180 references], Sensors and actuators based on carbon nanotubes and their composites: a review, Composites Science and Technology, May 2008, 68(6), 1227-1249.
• BA Rozenberg and R Tenne [321 references], Polymer-assisted fabrication of nanoparticles and nanocomposites, Progress in Polymer Science, January 2008, 33(1), 40-112.
• Liliane Bokobza [121 references], Multiwall carbon nanotube elastomeric composites: a review, Polymer, 10 August 2007, 48(17), 4907-4920.
• GG Tibbetts, ML Lake, KL Strong and BP Rice [58 references], A review of the fabrication and properties of vapour-grown carbon nanofibre/polymer composites, Composites Science and Technology, June 2007, 67(7-8), 1709-1718.
• ET Thostenson, Chunyu Li and Tsu-Wei Chou [130 references], Nanocomposites in context, Composites Science and Technology, 2005, 65(3-4), 491-516.
• V Antoniucci, K-T Hsaio and SG Advani [76 references], Chapter 11: Review of polymer composites with carbon nanotubes, pages 397-437 in GO Shonaike and SG Advani (editors): Advanced Polymeric Materials - Structure Property Relationships, CRC Press LLC, Boca Raton FL, 2003.   ISBN 1-58716-047-1.
• ET Thostenson, Z Ren and T-W Chou [86 references], Advances in the science and technology of carbon nanotubes and their composites: a review, Composites Science and Technology, 2001, 61(13), 1899-1912.
• Natural fibre composites
• M Hughes [89 references], Defects in natural fibres: their origin, characteristics and implications for natural fibre-reinforced composites, Journal of Materials Science, 2012, 47(2), 599-609.
• E Zini and M Scandola [83 references], Green composites: an overview, Polymer Composites, 2011, 32(12), 1905-1915.
• FP La Mantia and M Morreale [148 references], Green composites: a brief review, Composites Part A: Applied Science and Manufacturing, June 2011, 42(6), 579-588.
• H Ku, H Wang, N Pattarachaiyakoop and M Trada [27 references], A review on the tensile properties of natural fiber reinforced polymer composites, Composites Part B: Engineering, June 2011, 42(4), 856-873.
• M Thiruchitrambalam, A Athijayamani, S Sathiyamurthy and A Syed Abu Thaheer [81 references], A review on the natural fiber-reinforced polymer composites for the development of Roselle fiber-reinforced polyester composite, Journal of Natural Fibers, 2010, 7(4), 307-323.
• JK Pandey, SH Ahn, CS Lee, AK Mohanty and M Misra [142 references], Recent advances in the application of natural fiber-reinforced composites, Macromolecular Materials and Engineering, 2010, 295, 975–989.
• A Hassan, AA Salema, FN Ani and AA Bakar [105 references], A review on oil palm empty fruit bunch fiber reinforced polymer composite materials, Polymer Composites, 2010, 31(12), 2079-2101.
• J Summerscales, N Dissanayake, W Hall and AS Virk [75 references], A review of bast fibres and their composites. Part 1: fibres as reinforcements, Composites Part A: Applied Science and Manufacturing, October 2010, 41(10), 1329-1335.
• J Summerscales, N Dissanayake, W Hall and AS Virk [99 references], A review of bast fibres and their composites. Part 2: composites, Composites Part A: Applied Science and Manufacturing, October 2010, 41(10), 1336-1344.
• C Hill and M Hughes [75 references], Natural fibre reinforced composites opportunities and challenges, Journal of Biobased Materials and Bioenergy, June 2010, 4(2), 148-158.
• S Kalia, BS Kaith and I Kaur [199 references], Pretreatments of natural fibers and their application as reinforcing material in polymer composites - a review, Polymer Engineering and Science, 2009, 49(7), 1253 - 1272.
• IM De Rosa, C Santulli and F Sarasin [83 references], Acoustic emission for monitoring the mechanical behaviour of natural fibre composites: a literature review, Composites Part A: Applied Science and Manufacturing, September 2009, 40(9), 1456-1469.
• Yong Cao, Yi-Qiang Wu and Koichi Goda [32 references], Development and application of composites reinforced with kenaf, Polymer Materials Science and Engineering, July 2008, 24(7), 11-15.
• MJ John and S Thomas [128 references], Biofibres and biocomposites, Carbohydrate Polymers, 8 February 2008, 71(3), 343-364.
• X Li, HG Tabil and S Panigrahi, Chemical treatments of natural fibre for use in natural fibre-reinforced composites: a review, Journal of Polymers and the Environment, January 2007, 15(1), 25-33.
• PA Fowler, JM Hughes and RM Elias [97 references], Biocomposites: technology, environmental credentials and market forces, Journal of the Science of Food and Agriculture, 2006, 86, 1781–1789.
• RMN Arib, SM Sapuan, MAMM Hamdan, MT Paridah and HMDK Zaman, A literature review of pineapple fibre reinforced polymer composites, Polymers and Polymer Composites, 2004, 12(4), 341-348.
• AN Netravali and S Chabba [70 references], Composites get greener, Materials Today, April 2003, 6(4), 22-29.
• D Ruys, A Crosky and WJ Evans [15 references], Natural bast fibre structure, International Journal of Materials and Product Technology, 2002, 17(1-2), 2 - 10.
• J George, MS Sreekala and S Thomas [102 references], A review on interface modification and characterization of natural fiber reinforced plastic composites, Polymer Engineering and Science, 2001, 41(9), 1471-1485.
• AK Mohanty, M Misra and G Hinrichsen [254 references], Biofibres, biodegradable polymers and biocomposites: an overview, Macromolecular Materials and Engineering, 2000, 276/277(1), 1–24.
• DN Saheb and JP Jog [115 references], Natural fiber polymer composites: a review, Advances in Polymer Technology, 1999, 18(4), 351-363.
• AK Mohanty and M Misra [327 references], Studies on jute composites - a literature review, Polymer-Plastics Technology and Engineering, 1995, 34(5) 729 – 792.
• Naval structures
  • AP Mouritz, E Gellert, P Burchill and K Challis [160 references], Review of advanced composite structures for naval ships and submarines, Composite Structures, July 2001, 53(1), 21-42.
• Nettle fibre
• CR Vogl and A Hartl, Production and processing of organically grown fiber nettle (Urtica dioica L.) and its potential use in the natural textile industry: a review, American Journal of Alternative Agriculture, 2003, 18, 119-128.
• Non-destructive testing
• UIK Galappaththi, AKM de Silva, M Macdonald and OR Adewale [20 references], Review of inspection and quality control techniques for composite wind turbine blades, Insight, February 2012, 54(2), 82-85.
• C Garnier, M-L Pastor, F Eyma and B Lorrain [22 references], The detection of aeronautical defects in situ on composite structures using non-destructive testing, Composite Structures, April 2011, 93(5), 1328-1336.
• M Wall, SF Burch and J Lilley, Review of models and simulators for NDT reliability (probability of detection), Insight, November 2009, 51(11), 612-619.
• MA Drewry and GA Georgiou [10 references], A review of NDT techniques for wind turbines, Insight, March 2007, 49(3), 137-141.
• EA Birt and RA Smith [19 references], A review of NDE methods for porosity measurement in fibre-reinforced polymer composites, Insight, November 2004, 46(11), 681-686.
• John Summerscales [56 references], Manufacturing defects in fibre-reinforced plastics composites, Insight, December 1994, 36(12), 936-942.
• J Summerscales [52 references], Non-destructive measurement of the moisture content in fibre-reinforced plastics, British Journal of Non-Destructive Testing, February 1994, 36(2), 64-72.
• John Summerscales [83 references], NDT of advanced composites: an overview of the possibilities, British Journal of Non-Destructive Testing, November 1990, 32(11), 568-577.
• Non-Newtonian Flow
• T Sochi [96 references], Non-Newtonian flow in porous media, Polymer, 15 October 2010, 51(22), 5007-5023.
• Notched strength
  • Jonathan Awerbuch and Madhu S Madhukar, Notched strength of composite laminates: predictions and experiments - a review, Journal of Reinforced Plastics and Composites, January 1985, 4(1), 3 - 159.
• Offshore NDT
• O Førli and GA Raine [43 references], NDT offshore: a review of current practice, Insight, June 1996, 38(6), 399-405+411.
• Open mould manufacture
• D Cripps, TJ Searle and J Summerscales [129 references], Open Mould Techniques, Chapter 21 in R Talreja and J-A Månson (editors): "Comprehensive Composite Materials Encyclopædia, volume 2: Polymer Matrix Composites", Elsevier Science, Oxford, July 2000, pp 737-761.  ISBN: 0-08-043720-6.
• Optical interferometry
  • H Shang and J Gao [158 references], Theories and industrial applications of optical interferometric NDT techniques: a review, Insight, May 2009, 51(5), 240-251.
• Optical sensors
  • M Majumder, TK Gangopadhyay, AK Chakraborty, K Dasgupta and DK Bhattacharya [121 references], Fibre Bragg gratings in structural health monitoring - present status and applications, Sensors and Actuators A: Physical, 15 September 2008, 147(1), 150-164.
  • N Takeda, Y Okabe and T Mizutani, Damage detection in composites using optical fibre sensors, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, August 2007, 221(4), 497-508.
  • TK Gangopadhyay [102 references], Prospects for Fibre Bragg Gratings and Fabry-Perot Interferometers in fibre-optic vibration sensing, Sensors and Actuators A: Physical, 15 June 2004, 113(1), 20-38.
  • W Du, XM Tao, HY Tam and CL Choy [32 references], Fundamentals and applications of optical fiber Bragg grating sensors to textile structural composites, Composite Structures, July 1998, 42(3), 217-229.
  • J Summerscales [81 references], Embedded optical sensors in fibre reinforced plastics, International Journal of Optical Sensors, July 1986, 1(4), 287-298.
• Optically active polymers
• S Mallakpour and A Zadehnazari1 [261 references], Advances in synthetic optically active condensation polymers – a review, eXPRESS Polymer Letters, 2011, 5(2), 142–181.
• Permeability measurement
  • J Summerscales [24 references], The effect of permeant on the measured permeability of a reinforcement, Proceedings of the 7th International Conference on Flow Processes in Composite Materials, University of Delaware, Newark USA, 7-9 July 2004, pp 471-476.
  • Chapter 7.2 in CD Rudd, AC Long, KN Kendall and CGE Mangin [24 references], Liquid Moulding Technologies, Woodhead Publishing, Cambridge, 1997, pages 203-221.  ISBN 1-85573-242-4.
• Phased array ultrasonic testing
• M Moles, N Dubé, S Labbé and E Ginzel [18 references], Review of ultrasonic phased arrays for pressure vessel and pipeline weld inspections, Journal of Pressure Vessel Technology, August 2005, 127(3), 351-356.
• Phenolic resins
  • LA Pilato, JH Koo, GE Wissler and S Lao, A review - phenolic and related resins and their nanomodification into phenolic resin FRP systems, Journal of Advanced Materials, 2008, 40(3), 5-16.
  • CP Reghunadhan Nair [239 references], Advances in addition-cure phenolic resins, Progress in Polymer Science, 2004, 29(5), 401-498.
• Photoinitiated crosslinking
  • C Decker [215 references], Photoinitiated crosslinking polymerisation, Progress in Polymer Science, 1996, 21(4), 593-650.
• Piezoelastic materials
  • TR Tauchert, F Ashida, N Noda, S Adali and V Verijenko [62 references], Developments in thermopiezoelasticity with relevance to smart composite structures, Composite Structures, January-March 2000, 48(1-3), 31-38.
• Plasma technologies
  • Rongzhi Li, Lin Ye and Yiu-Wing Mai [68 references], Application of plasma technologies in fibre-reinforced polymer composites: a review of recent developments, Composites Part A: Applied Science and Manufacturing, 1997, 28(1), 73-86.
• Polyaniline
• C Laslau, Z Zujovic, J Travas-Sejdic [141 references], Theories of polyaniline nanostructure self-assembly: towards an expanded, comprehensive Multi-Layer Theory (MLT), Progress in Polymer Science, December 2010, 35(12), 1403-1419.
• J Stejskal, I Sapurina and M Trchová [593 references], Polyaniline nanostructures and the role of aniline oligomers in their formation, Progress in Polymer Science, December 2010, 35(12), 1420-1481.
• Polybenzoxazines
• NN Ghosh, B Kiskan and Y Yagci [183 references], Polybenzoxazines - new high performance thermosetting resins: synthesis and properties, Progress in Polymer Science, November 2007, 32(11), 1344-1391.
• Polycaprolactone
• MA Woodruff and DW Hutmacher [217 references], The return of a forgotten polymer - polycaprolactone in the 21st century, Progress in Polymer Science, October 2010, 35(10), 1217-1256.
• Polyesters from cyclic oligomers
  • K Pang, R Kotek and A Tonelli [92 references], Review of conventional and novel polymerization processes for polyesters, Progress in Polymer Science, November 2006, 31(11), 1009-1037.
• Poly ether ether ketone (PEEK)
  • P Patel, TR Hull, RW McCabe, D Flath, J Grasmeder and M Percy [29 references], Mechanism of thermal decomposition of poly(ether ether ketone) (PEEK) from a review of decomposition studies, Polymer Degradation and Stability, May 2010, 95(5), 709-718.
• Polyethylene fibres
  • I Chodák [214 references], High modulus polyethylene fibres: preparation, properties and modification by crosslinking, Progress in Polymer Science, 1998, 23(8), 1409-1442.
• Polyimidazoles
• Emily B Anderson and Timothy E Long [89 references], Imidazole- and imidazolium-containing polymers for biology and material science applications, Polymer, 28 May 2010, 51(12), 2447-2454.
• Polyimides
• JG Kennemur and BM Novak [137 references], Advances in polycarbodiimide chemistry, Polymer, 5 April 2011, 52(8), 1693-1710.
• RH Pater [66 references], Thermosetting polyimides, SAMPE Journal, September/October 1994, 30(5), 29-38.
• Poly(lactic acid)
  • T Mukherjee and N Kao [73 references], PLA based biopolymer reinforced with natural fibre: a review, Journal of Polymers and the Environment, September 2011, 19(3), 714-725.
  • O Coulembier, S Moins, J-M Raquez, F Meyer, L Mespouille, E Duquesne and P Dubois [27 references], Thermal degradation of poly(l-lactide): accelerating effect of residual DBU-based organic catalysts, Polymer Degradation and Stability, May 2011, 96(5), 739-744.
  • RM Rasal, AV Janorkar and DE Hirt [198 references], Poly(lactic acid) modifications, Progress in Polymer Science, March 2010, 35(3), 338-356.
  • L-T Lim, R Auras and M Rubino [194 references], Processing technologies for poly(lactic acid), Progress in Polymer Science, August 2008, 33(8), 820-852.
  • AP Gupta and Vimal Kumar [230 references], New emerging trends in synthetic biodegradable polymers – polylactide: a critique, European Polymer Journal, October 2007, 43(10), 4053-4074.
  • Bhuvanesh Gupta, Nilesh Revagade and Jöns Hilborn, Poly(lactic acid) fiber: an overview, Progress in Polymer Science, April 2007, 32(4), 455-482.
  • A Södergård and M Stolt [349 references], Properties of lactic acid based polymers and their correlation with composition, Progress in Polymer Science, July 2002, 27(6), 1123-1163.
  • D Garlotta, A literature review of poly(lactic acid), Journal of Polymers and the Environment, 2001, 9(2), 63-84.
• Polymer feedstocks from coal
  • J Gibson and PFM Paul [0 references], Polymer feedstocks from coal: the potential, RAPRA Diamond Jubilee Conference "The future and what it holds for the plastics industry", Hawkstone Park Hotel at Weston-under-Redcastle, 3-4 July 1979, pages 27-51.
• Polymers as sensors
  • Basudam Adhikari and Sarmishtha Majumdar [466 references], Polymers in sensor applications, Progress in Polymer Science, 2004, 29(7), 699-766.
• Poly(phenylene sulphide)
• Peggy Cebe, Review of recent developments in poly(phenylene sulphide), Polymers and Polymer Composites, 1995, 3(4), 239-266.
• Polysaccharides
• V Singh, P Kumar and R Sanghi [151 references], Use of microwave irradiation in the grafting modification of the polysaccharides - a review, Progress in Polymer Science, February 2012, 37(2), 340-364.
• Polystyrene
  • E Bhoje Gowd, Kohji Tashiro and C Ramesh [150 references], Structural phase transitions of syndiotactic polystyrene, Progress in Polymer Science, March 2009, 34(3), 280-315.
• Polyurethane
  • DK Chattopadhyay1 and DC Webster, Thermal stability and flame retardancy of polyurethanes, Progress in Polymer Science, October 2009, 34(10), 1068-1133.
• Preform polymer particles
• BS Hayes and JC Seferis, Modification of thermosetting resins and composites through preformed particles, Polymer Composites, 2001, 22(4), 451-467.
• Prepreg broadgoods
  • GC Newell, RO Buckingham and K Khodabandehloo [24 references], The automated manufacture of prepreg broadgoods components - a review of literature, Composites Part A: Applied Science and Manufacturing, 1996, 27(3), 211-217.
• Pressure-sensitive paint
• JW Gregory, K Asai, M Kameda, T Liu and JP Sullivan [103 references], A review of pressure-sensitive paint for high-speed and unsteady aerodynamics, Proceedings of IMechE Part G: Journal of Aerospace Engineering, 2008, 222(2), 249-290.
• Process monitoring
• John Summerscales [172 references], Chapter 2: In-process monitoring for control of closed-mould techniques for the manufacture of thermosetting matrix composites, pages 57-101 in GO Shonaike and SG Advani (editors): Advanced Polymeric Materials - Structure Property Relationships, CRC Press LLC, Boca Raton FL, 2003.   ISBN 1-58716-047-1.
• Pultrusions
  • MF Sá, AM Gomes, JR Correia and N Silvestre [36 references], Creep behavior of pultruded GFRP elements – Part 1: literature review and experimental study, Composite Structures, September 2011, 93(10), 2450-2459
  • JT Mottram and Y Zheng [27 references], State-of-the-art review on the design of beam-to-column connections for pultruded frames, Composite Structures, August 1996, 35(4), 387-401.
• Railway sleepers
  • A Manalo, T Aravinthan, W Karunasena and A Ticoalu (54 references), A review of alternative materials for replacing existing timber sleepers, Composite Structures, February 2010, 92(3), 603-611.
• Raman spectroscopy
• Gi Xue [231 references], Fourier transform Raman spectroscopy and its application for the analysis of polymeric materials, Progress in Polymer Science, 1997, 22(2) 313-406.
• Recycling technologies
• QF Yue, CX Wang, LN Zhang, Y Ni and YX Jin [16 references], Glycolysis of poly(ethylene terephthalate) (PET) using basic ionic liquids as catalysts, Polymer Degradation and Stability, April 2011, 96(4), 399-403.
• M Sadat-Shojai and G-R Bakhshandeh [98 references], Recycling of PVC wastes, Polymer Degradation and Stability, April 2011, 96(4), 404-415.
• L Scelsi, A Hodzic, C Soutis, SA Hayes, S Rajendran, MA AlMa’adeed and R Kahraman [73 references], A review on composite materials based on recycled thermoplastics and glass fibres, Plastics, Rubber and Composites, 2011, 40(1), 1-10.
• F Vilaplana and S Karlsson [148 references], Quality concepts for the improved use of recycled polymeric materials: a review, Macromolecular Materials and Engineering, 14 April 2008, 293(4), 274-297.
• SJ Pickering [43 references], Recycling technologies for thermoset composite materials: current status, Composites Part A: Applied Science and Manufacturing, August 2006, 37(8), 1206-1215.
• F Awaja and D Pavel [174 references], Recycling of PET, European Polymer Journal, July 2005, 41(7), 1453-1477.
• JM Henshaw, W Han and AD Owens, An overview of recycling issues for composite materials , Journal of Thermoplastic Composite Materials, 1996, 9(1), 4-20.
• Rehabilitation
  • MV Seica and JA Packer [31 references], FRP materials for the rehabilitation of tubular steel structures, for underwater applications, Composite Structures, October 2007, 80(3), 440-450.
• Release agents
• GW Critchlow, RE Litchfield, I Sutherland, DB Grandy and S Wilson [75 references], A review and comparative study of release coatings for optimised abhesion in resin transfer moulding applications, International Journal of Adhesion and Adhesives, 2006, 26(8), 577–599.
• Reliability
• M Chiachio, J Chiachio and G Rus [124 references], Reliability in composites – A selective review and survey of current development, Composites Part B: Engineering, April 2012, 43(3), 902-913.
• Renewable energy
• I Ganesh [70 references], Conversion of carbon dioxide to methanol using solar energy - a brief review, Materials Sciences and Application, October 2011, 2(10), 1407-1415.
• MJ Khan, G Bhuyan, MT Iqbal and JE Quaicoe [79 references], Hydrokinetic energy conversion systems and assessment of horizontal and vertical axis turbines for river and tidal applications: a technology status review, Applied Energy, October 2009, 86(10), 1823-1835.
• AB Gill [89 references], Offshore renewable energy: ecological implications of generating electricity in the coastal zone, Journal of Applied Ecology, August 2005, 42(4), 605–615
• Magorzata Góralczyk [7 references], Life-cycle assessment in the renewable energy sector, Applied Energy, July-August 2003, 75(3-4), 205-211.
• Repair of composite structures
• L Dorworth and G Gardiner [4 references], Repair of composite structures - a review, Journal of Advanced Materials (SAMPE Quarterly), 2007, 39(4), 3-13.
• H Hosseini-Toudeshky [23 references], Effects of composite patches on fatigue crack propagation of single-side repaired aluminium panels, Composite Structures, November 2006, 76(3), 243-251.
• Residual stress in thermoplastic composites
• Patricia P Parlevliet, Haralf EN Bersee and Adriaan Beukers [78 references], Residual stresses in thermoplastic composites - a study of the literature - Part I: Formation of residual stresses, Composites Part A: Applied Science and Manufacturing, November 2006, 37(11), 1847-1857.
• Patricia P Parlevliet, Harald EN Bersee and Adriaan Beukers [146 references], Residual stresses in thermoplastic composites - a study of the literature - Part II: Experimental techniques, Composites Part A: Applied Science and Manufacturing, March 2007, 38(3), 651-665.
• Patricia P Parlevliet, Harald EN Bersee and Adriaan Beukers [201 references], Residual stresses in thermoplastic composites – a study of the literature. Part III: Effects of thermal residual stresses,  Composites Part A: Applied Science and Manufacturing, June 2007, 38(6), 1581-1596.
• Resin infusion (RIFT)
• SW Beckwith [no references], Resin Infusion Technology * Part 1 - Industry highlights * Part 2 - Process definitions and industry variations * Part 3 - A detailed overview of RTM and VIP infusion processing, SAMPE Journal, 2007, 43(1), 61 and 43(3), 46 and 43(4), 6 & 66-70.
• J Summerscales and TJ Searle, Review: Low pressure (vacuum infusion) techniques for moulding large composite structures, Proc IMechE Part L: Journal of Materials: Design and Applications, February 2005, L219(1), 45-58.
• D Cripps, TJ Searle and J Summerscales [129 references], Open Mould Techniques, Chapter 21 in R Talreja and J-A Månson (editors): "Comprehensive Composite Materials Encyclopædia, volume 2: Polymer Matrix Composites", Elsevier Science, Oxford, July 2000, pp 737-761.  ISBN: 0-08-043720-6.
• CD Williams, J Summerscales and SM Grove [62 references], Resin infusion under flexible tooling (RIFT) - a review, Composites Part A: Applied Science and Manufacturing, July 1996, A27(7), 517-524.
• Resin Transfer Moulding (RTM)
  • D Abraham and R McIlhagger [37 references], A review of liquid injection techniques for the manufacture of aerospace composite structures, Polymers and Polymer Composites, 1996, 4(6), 437-444.
  • CL Tucker and RB Dessenberger [51 references], Governing equations for flow and heat transfer in stationary fiber beds, Chapter 8 of SG Advani (editor), Flow and Rheology in Polymer Composites Manufacturing, Elsevier Science BV, Amsterdam, 1994, pp 465-515.  ISBN 0-444-89347-4. UOP Library
  • SG Advani, MV Bruschke and RS Parnas [102 references], Resin transfer moulding phenomena in polymeric composites, Chapter 12 of SG Advani (editor), Flow and Rheology in Polymer Composites Manufacturing, Elsevier Science BV, Amsterdam, 1994, pp 465-515.  ISBN 0-444-89347-4. UOP Library
  • K van Harten [10 references], Production by resin transfer moulding, Chapter 4 of RA Shenoi & J F Wellicome (editors): Composite Materials in Maritime Structures - volume 1: Fundamental Aspects, Cambridge University Press, Cambridge, 1993, pp 86-126. ISBN 0-521-45153-1. UOP Library
  • LJ Lee [92 references], Material characterisation in liquid composite moulding, Makromolekulare Chemie: Macromolecular Symposium, 1993, 68, 169-191.
  • S Yalvaç, A Cohen and M Pollard [87+72 references], A review on modelling of resin transfer molding process (2 parts), First International Conference on Transport Phenomena in Processing, Honolulu, March 1992, 1183-1202.
• Retting of flax
• HSS Sharma, PC Mercer and AE Brown [50 references], Review of recent research on the retting of flax in Northern Ireland, International Biodeterioration, 1989,25(5), 327-342.
• Ring opening metathesis polymerization (ROMP)
  • A Leitgeb, J Wappel and C Slugov [266 references], The ROMP toolbox upgraded, Polymer, 24 June 2010, 51(14), 2927-2946.
• Risk management
• Frank Abdi, Tina Castillo and Edward Shroyer [40 references], Risk Management of Composite Structure, in Efstratios Nikolaidis, DM Ghiocel and Suren Singhal, Engineering Design Reliability Handbook, CRC Press, Boca Raton, December 2004. ISBN-13: 9780849311802. ISBN: 0-8493-1180-2.
• Robust design
• MCW Lee, Z Mikulik, DW Kelly, RS Thomson and R Degenhardt [20 references], Robust design – A concept for imperfection insensitive composite structures, Composite Structures, May 2010, 92(6), 1469-1477
• G-J Park, T-H Lee, KH Lee and K-H Hwang, Robust design: an overview, AIAA Journal, 2006, 44(1), 181–192.
• JK Allen, C Seepersad, HJ Choi and F Mistree [81 references], Robust design for multiscale and multidisciplinary designs, Journal of Mechanical Design, 2006, 128(4), 832–846.
• Ropes
• A J McLaren, Design and Performance of Ropes for Climbing and Sailing, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2006, 220(1), 1 - 12.
• Rubber
• S Banyopadhyay, SL Agrawal, R Ameta, S Dasgupta, R Mukhopadhyay, AS Deuri, SC Ameta and R Ameta [197 references], A overview of rubber recycling, Progress in Rubber, Plastics and Recycling Technology, 2008, 24(2), 73-112.
• Sandwich construction
• M Assarar, A El Mahi and J-M Berthelot [30 references], Evaluation of the dynamic properties of PVC foams under flexural vibrations, Composite Structures, May 2012, 94(6),1919-1931.
• Heng Hu, Salim Belouettar, Michel Potier-Ferry and El Mostafa Daya [22 references], Review and assessment of various theories for modeling sandwich composites, Composite Structures, July 2008, 84(3), 282-292.
• DJ O'Connor, A finite element package for the analysis of sandwich constructions, Composite Structures, 1987, 8(2), 143-161.
• Self assembly
• SB Darling [443 references], Directing the self-assembly of block copolymers, Progress in Polymer Science, October 2007, 32(10), 1152-1204.
• Self-healing materials
  • TC Mauldin and MR Kessler [269 references], Self-healing polymers and composites, International Materials Reviews, November 2010, 55(6), 317-346.
  • DV Andreeva and DG Shchukin [47 references], Smart self-repairing protective coatings, Materials Today, October 2008, 11(10), 24-30.
  • Dong Yang Wu, Sam Meure and David Solomon [228 references], Self-healing polymeric materials: a review of recent developments, Progress in Polymer Science, May 2008, 33(5), 479--522.
  • YC Yuan, T Yin, MZ Rong and MQ Zhang [86 references], Self healing in polymers and polymer composites - concepts, realization and outlook: a review, eXPRESS Polymer Letters, 2008, 2(4), 238-250.
  • MR Kessler [141 references], Self-healing: a new paradigm in materials design, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, August 2007, 221(4), 479-495.
• Self-reinforced polymers
(a.k.a. single polymer composites)
• Chengcheng Gao, Long Yu, Hongsheng Liu and Ling Chen [82 references], Development of self-reinforced polymer composites, Progress in Polymer Science, June 2012, 37(6), 767-780.
• T Huber, J Müssig, O Curnow, S Pang, S Bickerton and MP Staiger [175 references], A critical review of all-cellulose composites, Journal of Materials Science, 2012, 47(3), 1171-1186.
• Á Kmetty, T Bárány and J Karger-Kocsis [130 references], Self-reinforced polymeric materials: a review, Progress in Polymer Science, October 2010, 35(10), 1288-1310.
• KP Matabola, AR Vries, FS Moolman and AS Luyt [113 references], Single polymer composites: a review, Journal of Materials Science, December 2009, 44(23), 6213-6222.
• Self-sensing by electrical resistance measurement
  • DDL Chung, Damage detection using self-sensing concepts, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, August 2007, 221(4), 509-520.
• Shape memory alloys
  • Debdatta Ratna and J Karger-Kocsis, Recent advances in shape memory polymers and composites: a review, Journal of Materials Science, January 2008, 43(1), 254-269.
  • DJ Hartl and DC Lagoudas, Aerospace applications of shape memory alloys, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, August 2007, 221(4), 535-552.
• Shape memory polymers
  • Tao Xie [86 references], Recent advances in polymer shape memory, Polymer, 13 October 2011, 52(22), 4985-5000.
  • Qinghao Meng, Jinlian Hu [226 references], A review of shape memory polymer composites and blends, Composites Part A: Applied Science and Manufacturing, November 2009, 40(11), 1661-1672
  • Y Liu, H Lv, X Lan, J Leng, S Du [30 references], Review of electro-active shape-memory polymer composite, Composites Science and Technology, October 2009, 69(13), 2064-2068.
  • Debdatta Ratna and J Karger-Kocsis, Recent advances in shape memory polymers and composites: a review, Journal of Materials Science, January 2008, 43(1), 254-269.
  • B Dietsch and T Tong, A review - features and benefits of Shape Memory Polymers (SMPs), Journal of Advanced Materials (SAMPE), 2007, 39(2), 3-12.
• Sheet forming
• Teik-Cheng Lim and S Ramakrishna [84 references], Modelling of composite sheet forming - a review, Composites Part A: Applied Science and Manufacturing, 2002, A33(4), 515-537.
• Silicon carbide fibres
  • AR Bunsell and A Piant, A review of the development of three generations of small diameter silicon carbide fibres, Journal of Materials Science, February 2006, 41(3), 823-839.
• Silicon nitride
  • Z Krstic and VD Krstic [106 references], Silicon nitride: the engineering material of the future, Journal of Materials Science, 2012, 47(2), 535-552.
• Silk
  • V Jauzein and A Bunsell [25 references], Bio-composite aspects of silk: the sericin sheath acting as a matrix, Journal of Materials Science, 2012, 47(7), 3082-3088.
  • Fritz Vollrath and David Porter [47 references], Silks as ancient models for modern polymers, Polymer, 16 November 2009, 50(24), 5623-5632.
  • Charu Vepari and DL Kaplan [129 references], Silk as a biomaterial, Progress in Polymer Science, August-September 2007, 32(8-9), 991-1007.
  • Thomas Scheibel [78 references], Spider silks: recombinant synthesis, assembly, spinning, and engineering of synthetic proteins, Microbial Cell Factories, 2004, 3:14.
• Simulation of infiltration processes
  • KM Pillai [93 references], Modeling the unsaturated flow in liquid composite molding processes: a review and some thoughts, Journal of Composite Materials, December 2004, 38(23), 2097-2118.
  • E Lacoste, O Mantaux and M Danis [62 references], Numerical simulation of metal matrix composites and polymer matrix composites processing by infiltration: a review, Composites Part A: Applied Science and Manufacturing, 2002, 33(12), 1605-1614.
  • P Hubert and A Poursartip, A review of flow and compaction modelling relevant to thermoset matrix laminate processing, Journal of Reinforced Plastics and Composites, March 1998, 17(4), 286-318
• Sisal fibre/composites
• Y Li, Y-W Mai and L Ye [70 references], Sisal fibre and its composites: a review of recent developments, Composites Science and Technology, 2000, 60(11), 2037-2055.
• K Joseph, RD Tolêdo Filho, B James, S Thomas and L Hecker de Carvalho [75 references], A review on sisal fiber reinforced polymer composites, Revista Brasileira de Engenharia Agrícola e Ambiental, 1999, 3(3), 367-379.
• Size effects
• LS Sutherland, RA Shenoi and SM Lewis [68 references], Size and scale effects in composites, Composites Science and Technology, 1999, 59(2), 209-220.
• MR Wisnom [92 references], Size effects in the testing of fibre composite materials, Composites Science and Technology, 1999, 59(13), 1937-1957.
• Smart polymers
  • D Pugal, K Jung, A Aabloo and KJ Kim [87 references], Ionic polymer-metal composite mechanoelectrical transduction: review and perspectives, Polymer International, in press.
  • Ashok Kumar, Akshay Srivastava, Igor Yu Galaev and Bo Mattiasson [264 references], Smart polymers: Physical forms and bioengineering applications, Progress in Polymer Science, October 2007, 32(10), 1205-1237.
• Solder
• Hongtao Ma and Jeffrey C. Suhling, A review of mechanical properties of lead-free solders for electronic packaging, Journal of Materials Science, March 2009, 44(5), 1141-1158.
• Spider silks
• JG Hardy and TR Scheibel [218 references], Composite materials based on silk proteins, Progress in Polymer Science, September 2010, 35(9), 1093-1115.
• Thomas Scheibel [78 references], Spider silks: recombinant synthesis, assembly, spinning, and engineering of synthetic proteins, Microbial Cell Factories 2004, 3:14.
• Starch-based polymers
  • Fengwei Xie, PJ Halley and L Avérous [183 references], Rheology to understand and optimize processibility, structures and properties of starch polymeric materials, Progress in Polymer Science, April 2012, 37(4), 595-623.
  • G Moad [232 references], Chemical modification of starch by reactive extrusion, Progress in Polymer Science, February 2011, 36(2), 218-237.
  • Hongsheng Liu, Fengwei Xie, Long Yu, Ling Chen, Lin Li, Thermal processing of starch-based polymers, Progress in Polymer Science, December 2009, 34(12), 1348-1368.
  • M Mitrus [11 references], Glass transition temperature of thermoplastic starches, International Agrophysics, 2005, 19(3), 237-241.
• Statistical lifetime
• SL Phoenix [88 references], Modeling the statistical lifetime of glass fiber/polymer matrix composites in tension, Composite Structures, January-March 2000, 48(1-3), 19-29.
• Stiffeners
• RA Shenoi and GL Hawkins [16 references], An investigation into the performance characteristics of top-hat stiffener to shell plating joints, Composite Structures, 1995, 30(1), 109-121.
• Stimuli-responsive polymers
• F Liu and MW Urban [137 references], Recent advances and challenges in designing stimuli-responsive polymers, Progress in Polymer Science, January-February 2010, 35(1-2), 3-23.
• Stitched reinforcements  Also see Translaminar reinforced composites
• AP Mouritz, KH Leong and I Herszberg [115 references], A review of the effect of stitching on the in-plane mechanical properties of fibre-reinforced polymer composites, Composites Part A: Applied Science and Manufacturing, 1997, 28(12), 979-991.
• K Dransfield, C Baillie and Y-W Mai, Improving the delamination resistance of CFRP by stitching - a review, Composites Science and Technology, 1994, 50(3), 305-317.
• Strain and stress analysis
  • J Eaton-Evans, JM Dulieu-Barton and RL Burguete, Modern Stress and Strain Analysis: a state of the art guide to measurement techniques, British Society for Strain Measurement and Eureka! magazine, 2009.
• Strength
• Robin Olsson [41 references], A survey of test methods for multiaxial and out-of-plane strength of composite laminates, Composites Science and Technology, 12 April 2011, 71(6), 773-783.
• Stress transfer in short-fibre composites
  • KL Goh, RM Aspden and DWL Hukins [49 references], Review: finite element analysis of stress transfer in short-fibre composite materials, Composites Science and Technology, 2004, 64(9), 1091-1100.
• Styrene
• P Boffetta, HO Adami, P Cole, D Trichopoulos and JS Mandel [61 references], Epidemiologic studies of styrene and cancer: a review of the literature, Journal of Occupational and Environmental Medicine, November 2009, 51(11), 1275-1287.
• Supercritical carbon dioxide
  • SP Nalawade, F Picchioni and LPBM Janssen [231 references], Supercritical carbon dioxide as a green solvent for processing polymer melts: Processing aspects and applications, Progress in Polymer Science, 2006, 31(1) , 19-43.
• Superalloys
  • K Banerjee [66 references], The role of magnesium in superalloys - a review, Materials Sciences and Applications, 2011, 2, 1243-1255.
• Superplasticity
• TG Langdon, Seventy-five years of superplasticity: historic developments and new opportunities, Journal of Materials Science, 2009, 44(22), 5998-6010.
• Surface treatment
• S Farris, S Pozzoli, P Biagioni, L Duó, S Mancinelli and L Piergiovanni [52 references], The fundamentals of flame treatment for the surface activation of polyolefin polymers – a review, Polymer, 22 July 2010, 51(16), 3591-3605.
• Sustainable materials
• FP La Mantia and M Morreale [148 references], Green composites: A brief review, Composites Part A: Applied Science and Manufacturing, June 2011, 42(6), 579-588.
• RJ Koopmans [125 references], Sustainable technologies for innovative materials, Plastics, Rubber and Composites, May 2008, 37(2-4), 174-183
• Tack (of pressure sensitive adhesives with potential for use with preimpregnated materials)
• RA Roberts [17 references], Review of methods for the measurement of tack, PIRA/NPL Project PAJ1: Failure criteria and their application to visco-elastic/visco-plastic materials/Report 5, September 1997
• Tapered laminates
• K He, SV Hoa and R Ganesan [50 references], The study of tapered laminated composite structures: a review, Composites Science and Technology, 2000, 60(14), 2643-2657.
• Textile reinforcements and composites
• CD Papaspyrides, S Pavlidou and SN Vouyiouka [53 references], Development of advanced textile materials: natural fibre composites, anti-microbial, and flame-retardant fabrics, Proc. IMechE Part L: Journal of Materials: Design and Applications, 2009, 223(2), 91-102.
• JJ Crookston, AC Long and IA Jones [79 references], A summary review of mechanical property prediction methods for textile reinforced polymer composites, Proc IMechE Part L - Journal of Materials: Design and Applications, 2005, 219(2), 91-109.
• P Tan, L Tong and GP Steven [115 references], Modelling for predicting the mechanical properties of textile composites - a review, Composites Part A: Applied Science and Manufacturing, 1997, A28(11), 903-922.
• J Summerscales [150 references], High performance reinforcement fabrics, Progress in Rubber and Plastics Technology, 1987, 3(3), 20-32.
• Textile reinforcements and composites (books)
  • AC Long, Design and manufacture of textile composites, Woodhead Publishing, 2005. ISBN 978-1-85573-744-0. UoP Library 677 DES.
  • L Tong, AP Mouritz and MK Bannister, 3D fibre reinforced polymer composites, Elsevier, Amsterdam/Oxford, 2002. ISBN 0-08-043938-1. UoP Library 620.192 THR
  • A Miravete, 3-D textile reinforcements for composite materials, Woodhead Publishing, Cambridge, 1999. ISBN 978-1-85573-376-3. UoP Library 620.118 THR.
  • AE Bogdanovich and CM Pastore, Mechanics of textile and laminated composites with applications to structural analysis, Chapman & Hall, 1996. ISBN 0-412-61150-3. UoP Library 620.118 BOG.
  • T-W Chou and FK Ko, Textile structural composites, Elsevier, 1989. ISBN 0-444-42992-1. UoP Library 620.118 TEX.
• Thermal degradation
• MC Lafarie-Frenot, JC Grandidier, M Gigliotti, L Olivier, X Colin, J Verdu and J Cinquin [22 references], Thermo-oxidation behaviour of composite materials at high temperatures: a review of research activities carried out within the COMEDI program, Polymer Degradation and Stability, June 2010, 95(6), 965-974.
• Thermal management materials for electronics packages
  • C Zweben [17 references], Advances in high-performance thermal management materials - a review, Journal of Advanced Materials, 2007, 39(1), 3-10.  UOP Library 620.11 JOU.
• Thermoplastic matrix
• IY Chang and JK Lees [33 references], Recent developments in thermoplastic composites: a review of matrix systems and processing methods, Journal of Thermoplastic Composite Materials, July 1988, 1(3), 277-296.
• Thermosetting polymer matrix
• HD Stenzenberger [32 references], Recent advances of thermosetting polymers for advanced composites, Composite Structures, 1993, 24(3), 219-231.
• Three-dimensional textile composites
• M Ansar, W Xinwei and Z Chouwei [136 references], Modeling strategies of 3D woven composites: a review, Composite Structures, July 2011, 93(8), 1947-1963.
• AE Bogdanovich and MH Mohamed [63 references], Three-dimensional reinforcements for composites, SAMPE Journal, November/December 2009, 45(6), 8-28.
• Ryuta Kamiya, Bryan A Cheeseman, Peter Popper and Tsu-Wei Chou [62 references], Some recent advances in the fabrication and design of three-dimensional textile preforms: a review, Composites Science and Technology, 2000, 60(1), 33-47.
• AP Mouritz, MK Bannister, PJ Falzon and KH Leong [110 references], Review of applications for advanced three-dimensional fibre textile composites, Composites Part A: Applied Science and Manufacturing, 1999, A30(12), 1445-1461.
• J Brandt, K Drechsler and F-J Arendts [8 references], Mechanical performance of composites based on various three-dimensional woven-fibre preforms, Composites Science and Technology, 1996, 56(3), 381-386.
• Titanium matrix composites
  • K Morsi and VV Patel, Processing and properties of titanium-titanium boride (TiBw) matrix composites - a review, Journal of Materials Science, March 2007, 42(6), 2037-2047.
• Tooling
  • GJ Gibbons, RG Hansell, G Thacker and G Arnett [61 references], State of the art in low-cost, rapid composite forming tooling technologies, Journal of Advanced Materials (Covina), 2009, 41(2), 5-19.
• Transition temperatures
• RF Boyer [201 references], The relation of transition temperatures to chemical structure in high polymers, Rubber Chemistry and Technology, 1963, 36, 1303-1421.
• Translaminar reinforced composites  Also see Stitched reinforcements -and- Z-pinned laminates
• LC Dickinson, GL Farley and MK Hinders, Translaminar reinforced composites: a review, Journal of Composites Technology and Research, January 1999, 21(1), 3-15.
• Transmission electron microtomography (TEMT)
• H Jinnai and RJ Spontak [131 references], Transmission electron microtomography in polymer research, Polymer, 23 February 2009, 50(5), 1067-1087.
• Transverse/interlaminar stresses
• T Kant and K Swaminathan [99 references], Estimation of transverse/interlaminar stresses in laminated composites: a selective review and survey of current developments, Composite Structures, 2000, 49(1), 65-75.
• Ultrasonic non-destructive testing
• MJ Whittle [13 references], A review of worldwide practice and experience in the qualification of ultrasonic inspections of nuclear components over the past two decades, Insight, March 2009, 51(3), 140-150.
• BW Drinkwater and PD Wilcox [67 references], Ultrasonic arrays for non-destructive evaluation: a review, NDT & E International, October 2006, 39(7), 525-541.
• Ultra-Violet (UV) Curing
  • A Endruweit, MS Johnson and AC Long, Curing of composite components by ultraviolet radiation: a review, Polymer Composites, 2006, 27(2), 119-128.
• Vibration-based NDT
• Y Zou, L Tong and GP Steven [72 references], Vibration-based model-dependent damage (delamination) identification and health monitoring for composite structures - a review, Journal of Sound and Vibration, 2000, 230(2), 357-378.
• Voids
• NCW Judd and WW Wright [47 references], Voids and their effects on the mechanical properties of composites - an appraisal, SAMPE Journal, January/February 1978, 14(1), 10-14.
• Vulcanisation and crosslinking
  • M Akiba and AS Hashim [180 references], Vulcanization and crosslinking in elastomers, Progress in Polymer Science, 1997, 22(3), 475-521.
• Waste rubber
  • B Adhikari, D De and S Maiti [207 references], Reclamation and recycling of waste rubber, Progress in Polymer Science , 2000, 25(7), 909-948.
• Wavelet transforms
  • VG Efimov, Wavelet analysis - new opportunities for NDT, Nondestructive Testing and Evaluation, March 2006, 21(1), 27-38.
  • CM Leavey, MN James, J Summerscales and R Sutton [36 references], An introduction to wavelet transforms: a tutorial approach, Insight, May 2003, 45(5), 344-353.
• Wear
  • Klaus Friedrich, Zhong Zhang and Alois K Schlarb [68 references], Effects of various fillers on the sliding wear of polymer composites, Composites Science and Technology, 2005, 65(15-16), 2329-2343.
• Welding thermoplastic composites
• B Patham and PH Foss [89 references], Thermoplastic vibration welding: review of process phenomenology and processing–structure–property interrelationships, Polymer Engineering and Science, January 2011, 51(1), 1-22.
• C Ageorges, L Ye and M Hou [204 references], Advances in fusion bonding techniques for joining thermoplastic matrix composites: a review, Composites Part A; Applied Science and Manufacturing, 2001, A32(6), 839-857.
• Ali Yousefpour, Mehdi Hojjati and Jean-Pierre Immarigeon [85 references], Fusion bonding/welding of thermoplastic composites, Journal of Thermoplastic Composite Materials, July 2004, 17(4), 303-341.
• D Stavrov and HEN Bersee [56 references], Resistance welding of thermoplastic composites – an overview, Composites Part A: Applied Science and Manufacturing, 2005, A36(1), 39-54.
• TJ Ahmed, D Stavrov, HEN Bersee and A Beukers, Induction welding of thermoplastic composites—an overview, Composites Part A: Applied Science and Manufacturing, 2006, A37(10), 1638-1651.
• Weibull statistics
• S van der Zwaag [31 references], The concept of filament strength and the Weibull modulus, Journal of Testing and Evaluation, September 1989, 17(5), 292-298.
• P Kittl and G Diáz [334 references], Weibull's fracture statistics, or probabilistic strength of materials: state of the art, Res Mechanica, 1988, 24(2), 99-207.
• Wetting
  • Mark Geoghegan and Georg Krausch [286 references], Wetting at polymer surfaces and interfaces, Progress in Polymer Science, 2003, 28(2), 261-302.
• Wood
• MP Ansell [65 references], Wood: Part 2. Wood modification, fire resistance, carbonization, wood–cement and wood–polymer composites, Journal of Materials Science, 2012, 47(2), 583-598.
• MP Ansell [72 references], Wood. Part 1: The wood cell wall and mechanical properties, Journal of Materials Science, 2011, 46(23), 7357-7368.
• Wood fibre composites
• AK Bledzki, S Reihmane and J Gassan [52 references], Thermoplastics reinforced with wood fillers: a literature review, Polymer-Plastics Technology and Engineering, 1998, 37(4), 451 – 468.
• Z-pinned laminates  Also see Translaminar reinforced composites
• AP Mouritz [95 references], Review of z-pinned composite laminates, Composites Part A: Applied Science and Manufacturing, December 2007, 38(12), 2383-2397.
• IK Partridge, DDR Cartié and T Bonnington [38 references], Chapter 3: Manufacture and performance of Z-pinned composites, pp 103-138 in GO Shonaike and SG Advani (editors): Advanced Polymeric Materials - Structure Property Relationships, CRC Press LLC, Boca Raton FL, 2003.   ISBN 1-58716-047-1.