|
ACMC/SAMPE Conference on Marine Composites Plymouth, 11-12 September 2003 (SCU C502) |
 |
Conference website |
| Thursday 11 September 2003 (morning) |
Thursday 11 September 2003 (afternoon) |
FRIDAY 12 September 2003 |
| PROCESSING |
MATERIALS |
STRUCTURES |
| 0900 Prospective Legislation and the GRP Industry/1703 Les Norwood/British Plastics Federation, UK |
1330 Stress analysis in compression of NCF composites with large out-of-plane misalignments/1710
CPAASM D Mattsson, R Joffe and J Varna/Luleå University of Technology, Sweden |
0930 The Use of Structural Adhesives in the Marine Industry/1707 Mark Cooper/Scott Bader/UK |
| 0930 Closed Mould Processing in the Marine Industry/1706 Mark Cooper/Scott Bader, UK |
1400 Osmosis in Marine Composites/1713 Nigel Clegg/Consultant, UK |
1000 Design and Test of Lightweight Sandwich T-joint for Naval Ships/1704
CPAASM Aage Lystrup and Helmuth Toftegaard /RISO National Laboratory, Denmark |
| 1000 The means to void content reduction in vacuum infusion process/1700 Md Afendi, WM Banks and D Kirkwood/University of Strathclyde - Scotland, UK |
1430 Modelling the properties of ageing marine composites/1715 G Kotsikos, Jody Dalzel-Job, K Morris, J Mawella/QinetiQ, Scotland |
1030 Flexural behaviour of top hat stiffened GFRP plate panels/1705 Omer Eksik, R A Shenoi and S S J Moy/University of Southampton, UK |
| 1030 Modelling composites manufacturing techniques/1719 Arjen Koorevaar/PolyWorx, The Netherlands |
1500 Afternoon tea | 1100 Coffee |
| 1100 Coffee | NON-DESTRUCTIVE TESTING |
|
| 1530 The Potential Use of Optical Strain Imaging in Marine Composite Applications/1701
CPAASM Mel Richardson and Zongyi Zhang/University of Portsmouth, UK |
1130 Application of Fiber Reinforced Plastics (FRP) in large removable bulkhead on board of a ship/1714 Wiard Leenders/Delft University of Technology, The Netherlands | |
| FIRE | 1600 Application of Smart Optical Fibre Sensors for Structural Load Monitoring/1702 Crispin Doyle/Smart Fibres Ltd, UK |
1200 Oil platforms, destroyers and frigates: case studies of QinetiQ's marine composite patch repairs/1716
CPAASM Toby Turton/ QinetiQ/UK |
| 1130 Assessment of the mechanical performance of phenolic laminates after ageing in a marine environment/1708 Frédérique Le Lay Joëlle Gutierrez/DCN CESMAN/France |
1630 Rapid, Sensitive Inspection of Marine Composites using Laser Shearography/1712 Roger Gregory/Laser Technology (UK) Limited, UK |
1230 Use of composites in the Visby stealth corvette/1718 Fredrik Lindblom/FMV, Sweden |
| 1200 Light Rigid Fire Blockers/1711
CPAASM Ryszard Kozlowski, Bozena Mieleniak and Krzysztof Bujnowicz/Institute of Natural Fibres, Poland |
1700 NDT of sandwich structures/1717 Thomas Wulf/FORCE Technology, Denmark |
|
| 1230 Lunch |
1900 Tour then Conference Dinner at
National Marine Aquarium
 (Click on the thumbnails for a higher resolution picture at ~140KB)) |
1300 Close of Conference and Lunch |
|
Advanced Composites Manufacturing Centre School of Engineering Faculty of Technology University of Plymouth Plymouth PL4 8AA United Kingdom |
 |