A limited number of the student project reports listed below are still available in
Brunel 007.
In some cases, notably where reports are missing, a indicative title preceded by ** is
given and may not be that which was on the project report.
Click here for brief outlines of projects offered for the forthcoming year
Provisional for AY2012/13
- Lewis Davy (BEng MEC - supervised by JS): The effect of contaminants on the structural integrity of epoxy-based composite materials
Provisional for AY2011/12
- James Aplin (BEng - supervised by SMG): Studies of heat flow in ‘sustainable’ building materials – property measurement and transient models
- Paul Arnold (BEng MEC - supervised by MEM) - {TBC}
- {TBC} Oliver Barlow (BSc MCT - supervised by Huirong Le): Use of composite materials in upper limb prosthetics
- Joseph Barnaby (BEng MEC - supervised by MEM/JS): {commercial-in-confidence}
- Ethan Bradbury (BSc MST - supervised by JS): Natural fibre
composites in the mariine industry?
- James Downing (BEng MEC - supervised by JS): Safety release
snowboard bindings
- {TBC} Antonios Fyrigos-Koulouris (BEng MEC - supervised by ??): {TBC}
- Sebastien Greber (BSc MST - supervised by SMG):
Resin infusion
of sandwich structures using Nomex aramid honeycomb cores
for boat hulls
- Nicholas Hall (BSc MCT - supervised by SMG): The investigation in to the manufacturing and structural performance of sub sea tidal turbine blades
- Fraser Horn (BSc - supervised by SMG): Impact behavior of composites: with ballistic applications
- Kevin Kong (BEng MEC - supervised by JS): Flexural
properties of isothermally aged unidirectional carbon fibre
reinforced epoxy composites.
- Vlad Kumar (BEng MEC - supervised by JS): Stress
sensitive smart composite material
- Thomas Lucas {BEng MEC - supervised by YMD): Vertical axis turbine
- Sam Newton: (BSc MCT - supervised by JS): Venting of Nomex honeycomb cores
during out-of-autoclave fabrication of sandwich panels
- Daniel Overton (BEng MEC - supervised by JS): Retention of silicone on moulded composite surfaces (with Alan Harper Composites - Saltash).
- Max St Aubin (BEng MEC - supervised by JS): Interlaminar shear strength
of fibre-reinforced polymers
- Charlie Sherman (BEng MEC - supervised by Neill Hughes): {downhill cycling}
- {TBC} Oliver Snogles (BEng MEC - supervised by ??): {variable spolier}
- Paul Sutcliffe (BEng Civil Engineering - supervised by JS): Rehabilitation of concrete structures with carbon fibre reinforced plastics
- Matt Wild (BEng MEC - supervised by SMG}: Designing and testing a Formula One front wing
- Richard York (BSc MCT - supervised by SMG): Natural fibre composites for fluid containment applications (with PFG Technology - Plymouth)
- David Zollo (BEng MEC - supervised by SKS): Study of the benefits of sloped armour
Current in AY2010/11
- Patrick Adams (BSc - supervised by MMS): Recycling carbon fibres
- Benjamin Andrews (BSc - supervised by SMG): The controlled deflection of a laminate composite material by means of a mechanical device, the alignment of fibres or a combination of both
- Jack Cheasley (BSc - supervised by SMG): Design and development of an innovative system to optimise the stiffness of a snowboard
- Ben Cross (BSc - supervised by SMG): Investigation into thermal properties of composite laminates and the reasons they degrade when subjected to temperature cycles.
- Jackson Fearns (BSc MST - supervised by JS): The feasibility of
manufacturing with sustainable composites for the marine industry.
- Adam Kimber (BSc - supervised by SMG): Flexural shear properties of foam sandwich laminates.
- Paul Liddel (BEng MEC - supervised by MEM):
Integrated cooling/heating of co-located ice rink/swimming pool.
- John Martin (BEng MEC - supervised by ..): Improving the aerodynamics of the Varna II Hand Cycle
- Anthony Mead (BEng MEC - supervised by SMG): Investigation into a composite shell for disabled aeroplane seat
- Omar Sheikh (BEng MEC - supervised by JS/SMG): Testing of frequency response composite layups for application
in musical instruments.
- Christopher Skinner (BEng MEC - supervised by JS): Poisson's ratio of
reinforcement fibres.
- Adam Smith (BEng MEC - supervised by JS): Life Cycle Assessment of natural vs man-made fibres as reinforcements.
- Richard Spencer (BSc - supervised by JG): End-of-life composite mould tools
(with Mercedes GP)
- Stephen Thornberry (BEng MEC - supervised by JS): Compressibility of reinforcement and spacer media for in-mould gel coating in resin infusion.
- Alexandra Trebilco (BEng MEC - supervised by MEM): Cost of waste management (with South West Metallurgical Services)
- Miles Winter (BSc - supervised by JS): An investigation into mountain bike rear suspension design.
Completions in AY2009/10
- Muhammad Abdul Rahim (BEng MEC - supervised by JS): Optical monitoring of the transition from dry to wet reinforcement in RTM/RIFT
- Anas Ahmad Zabidi (BEng MEC - supervised by JS): Drape and conformability of fabric reinforcements
- Will Broom (BEng MEC - supervised by SMG): Development of industry capable through-thickness permeability apparatus for fibre reinforcement
- Thomas Canneaux (BEng MEC - supervised by JS): Flow enhancement in glass fibre reinforcement textiles
- Samuel Dinnis (BSc - supervised by SMG): Product design and manufacture of a composite street luge
- Jodie Garnham (Muffett) (BSc - supervised by SMG
- moderated by JS): Methods of joining
composite materials to metals and the effects they have in industry
- Samuel Haines (BEng MEC - supervised by JS): Carbon fibre [composite] floor tray for
use within the karting industry
- Peter Ham (BEng MEC - supervised by SMG): Analysis of the composites and manufacture of a composite shower tray
- James Harvey (BEng MEC - supervised by JS): Infusion and mechanical properties of heavy unidirectional carbon fibre composites (with Carr Reinforcements Limited - Stockport UK)
- Thomas Hill (BSc - supervised by SMG
- moderated by JS): An analysis of the theoretical design and
manufacture of a part-composite lightweight BMX front hub
- Martin Holt (BEng MEC - supervised by JS): Degradation of natural and man-made composites
- Steven Outram (BSc - supervised by SMG): Design and manufacture a sustainable composite windsurfing board
- Daryl Pell-Walpole (BSc - supervised by SMG
- moderated by JS): Study of pre-tensed composite laminates
- Gary Prudham (BEng MEC - supervised by JS): Development of the cool-clave processing method
- Tim Pugh (BEng MEC - supervised by SMG): The use of composites in the design of flexible hinges
- Rajnikant (MSc - supervised by JS): Design, manufacture and test of a
lightweight flatness gauge (with Lapmaster International - Lee Mill UK)
- Alistair Reader (BEng MEC - supervised by JS): Consolidation of sandwich structures using foaming resin cores
- Mark Sansom (BSc - supervised by SMG
- moderated by JS): Investigation into the effect of resin bond thickness on the failure of composites repairs
to metal structures
Completions in AY 2008/09
- Adnan Akbar (MSc - supervised by SMG - moderated by JS): Effect of manufacturing defects on the mechanical and physical performance of composite wind turbine blade structures
- Sam Bennett (BSc - supervised by DCP - moderated by MMS): Consideration of other methods of dealing with composites waste besides simple disposal.
- Sam Godden (MEng Civil Engineering (B) - supervised by JS): Reinforcement of concrete columns by composite overwrapping.
- Jack Ingram (BSc - supervised by MMS - moderated by JS): Potential treatments for the recycling, re-use and disposal of GRP.
- Varun Jose (MSc - supervised by SMG - moderated by JS): Design, structural analysis and manufacturing of composites materials for an industry
- Pankaj Kapoor (BSc - supervised by Bob Allen - moderated by JS): Use of composite materials in construction of shipping.
- Sam Kissick (BEng Civil Engineering - supervised by JS): Rehabilitation of concrete beams with RIFTed carbon fibre composites.
- Stephen Mileham (BSc - supervised by JS - moderated by SMG): Thermal non-destructive imaging of defects in glass- and carbon-fibre composites.
- Alastair Moppett (BSc - supervised by MMS - moderated by JS): Investigation of the mechanical properties of rubber-crumb reinforced polymers.
- Bharaneedharan Muralidharan (MSc - supervised by JS - moderated by SMG): In-mould gel-coating for resin infusion under flexible tooling (IMGC for RIFT).
- Sam Nicholls (BEng - supervised by SMG - moderated by MMS): CFD modelling of continuous filament mat (CFM) reinforcement permeability.
- Samuel Pickard (BSc - supervised by JS - moderated by SMG): Investigation of mechanical/thermal properties of nanoclay/carbon fibre reinforced polymer nanocomposites.
- Richard Chatterley (BEng - supervised by JS - moderated by SMG): Alternative materials for improved composite bearing cages (in collaboration with AAVF Limited).
- Blair Thomson (BSc - supervised by JS - moderated by WH): Life Cycle Assessment of natural vs man-made fibres as reinforcements.
- Adam Williams (BSc - supervised by SMG - moderated by WH): Investigation and sample testing of wood composite structures.
- Soo-Mi Yang (BEng - supervised by JS - moderated by SMG): Recycled carbon fibre (with materials from Milled Carbon Limited).
- Alasdair York (BEng MEC - supervised by SMG - moderated by WH): Optimising the use of fibre reinforced thermoplastics in small craft.
Completions in AY 2007/08
- Luke Ashman (BEng MEC - supervised by JS - moderated SMG): Natural fibre composites.
- Kayode Adebayo (BSc - supervised by SMG - moderated JS): Measurement of permeability in a fibre preform.
- Robert Bradford (BSc - supervised by MMS - moderated JS): An investigation into
current and future applications for rubber crumb.
- Simon Cox (BSc - supervised by MMS - moderated JS): Non-Destructive Testing (NDT) of composites.
- Enrico Da Lio (BEng MEC - supervised by SMG - moderated JS): Analysis of the properties
of glass fibre reinforced lunar concrete.
- James Gladman (BSc MCT in collaboration with WaterAid
- supervised by JS - moderated by MAB): Developing fog water collection techniques.
- Sam Godden (MEng Civil Engineering (A) - supervised by JS): Reinforcement of
concrete columns by composite overwrapping.
- John Hackett (BSc - supervised by SMG - moderated WH): Bend characteristics of wing masts for small sailing vessels.
-
Andrew Jenkins (BEng MEC - supervised by SMG - moderated JS): Redesign
and evolution of a composite prosthetic foot spring (with Polymeric Composites).
- Tristian Mather (BSc - supervised by MMS - moderated DCP): An investigation into the failure of RIBs due to hull slamming.
- Richard Parish (BSc - supervised by MMS - moderated YMD): Modelling and development of novel vertical axis wind turbine.
- Andrew Parsons (BSc - supervised MMS - moderated SMG): Transportable
microlight aircraft hangar.
- Ian Pearce (BSc - supervised by SMG - moderated YMD): Research into the feasibility of a variety of forms of prime mover as a method of propulsion for marine leisure craft.
- Kiran Rai (BSc - supervised YMD - moderated JS): Investigation into
increasing diesel engine power density and the application of composite
materials.
- Jack Read (BSc - supervised by MMS - moderated PKD): Hydrofoil canting keel.
- Robert Rudolf (BEng MEC - supervised by SMG - moderated WH): Analysis and testing of a
composite hat stiffener for an aerospace structure.
- Nick Score (BSc MCT - supervised by JS - moderated MMS): Deterioration of natural fibre reinforcements by
heat, fluids and/or composting.
- Malcolm Shillingford (BEng - supervised by WH - moderated SMG): Investigation into
crashworthiness of continuous filament random mat (CFRM).
- Amandeep Singh (BEng - supervised by WH - moderated DJG) Study of contact patch
behaviour of tyres.
- Vikrant Singh (BSc MCT - supervised by JS - moderated WH): Interlaminar shear strength (with Carr Reinforcements Limited - Stockport UK) .
- Howard Tucker (BEng ME - supervised by WH and JS - moderated MMS): Statistical analysis
of natural fibres.
Completions in AY 2006/07
- Mayank Agarwal (MSc - supervised SMG - moderated JS): Air extraction from
infusion and RTM resins
- Tom Baker (BSc MCT - supervised by JS - moderated by DCP): Comparison of the environmental burden of natural vs glass fibres
- Neil Davy (BEng ME - supervised YMD - moderated MEM): Structural design of
an offshore RIB (design category B) for use as a tender for Princess Yachts
International
- Xavier Dubreuil (BEng MEC - supervised by SMG - moderated by JS):
Investigation of gel coat surface quality by optical techniques
- A Evans (BSc - supervised by SMG - moderated by WH): Thermoplastic
composite joining
- Jyothi Gooda (MSc -
supervised SMG - moderated JS): Flexural behaviour of complex sandwich
structures
- Dominic Henly (BEng ME - supervised by MMS - moderated by TP): Disposal
and recycling of end-of-life composites
- William Hooper (BEng ME - supervised by JS - moderated by SMG): Composite
steering wheel investigation
- Chris Hoppins (BSc MCT - supervised by JS - moderated by SMG): An
investigation into the correlation of the engineering
and textile technology parameters for measurement of strength in natural fibres
- Robert Hynes (BEng MEC - supervised by SMG - moderated by JS): Behaviour
prediction post-impact on thin-walled composite tubes
- David Ireland (BEng MEC - supervised by JS - moderated by SMG): Assessment of the surface
finish of gel-coated composites
- Moazzam Ali Khan (MSc - supervised by JS): Life Cycle Assessment of
natural vs man-made fibres as reinforcements
- Manak Kumar (BSc MCT - supervised by SMG - moderated by JS): Effect of
moisture content on composite materials
- Chin Leung (MSc - supervised MMS - moderated DCP): Potential method(s) of reusing
rubber dust from tyres
- Mohammed Mujeeb
(MSc - supervised WH - moderated DJG): Tyre contact modelling
- Nicola Pomroy (BSc MST - supervised by JS - moderated by WH): Design and
manufacture of a water-ski for
an instructor of a disabled skier
- Hamidullah Salimi (MSc -
supervised SMG - moderated MMS): Cost modelling for composite manufacture
- Hussain Syed (MSc - supervised WH - moderated DJG): Developing a tyre testing rig for
investigation of dynamic tyre properties
- Andrew White (BEng ME - supervised by WH/JS - moderated by DCP):
"Crashworthiness" of Continuous
Filament Random Mat (CFRM) tubular structures
- Thomas Willmott (MSc -
supervised WH - moderated DJG): A methodology for costing waste
- John Woods (BEng MEC - supervised by SMG - moderated by JS): Moisture
absorption in porous media
Completions in 2006
- Michael Aaron (BSc PRMD306, April 2006 - supervised JS - moderated SMG): Carbon fibre filament
wound tubes with an internal structure
- Mayank Agarwal (BSc PRMD306, April 2006 - supervised SMG - moderated JS): Applications of composite materials
in large and small merchant ships
- Simon Dawe (BEng Composites, April 2006 - supervised SMG - moderated JS): Design and manufacture of a
composite mountain bike frame
- Andrew Littler (BEng, 2006 - supervised WH - moderated JWB): The design of a racing motorcycle
chassis
- Chinyiu Leung (BSc PRMD306, April 2006 - supervised David Plane - moderated
JS): Investigation of bullet resistant glazing
- design of a bullet resistant glazed door
- Will Rogers (BEng Composites, April 2006 - supervised JS - moderated DCP): Fractography of CFRP/GFRP
windsurfing masts
- Ben Rossiter (BSc PRMD306, 2006 - supervised MMS - moderated JS):
Investigating the core behaviour of ISKRA AT5-1 wind turbine blades
- Muhammad Shukri (BEng Composites, April 2006 - supervised SMG - moderated JS): Off-axis composite material
- Marlay Spencer (BSc PRMD306, April 2006 - supervised SMG - moderated JS): Composite material barrel for
a 17th century replica cannon
- Edward Tuite (BSc PRMD306, April 2006 - supervised MMS/JWB - moderated JS): An investigation into
improving performance of a twenty-nine foot sailing yacht through use of a front
and aft rudder configuration
- Adam Piers Winchester (BSc PRMD306, April 2006 - supervised DCP - moderated
MMS): The effects on the flexural properties of immersion of glass reinforced
polyester in varying pH solution
- Robert Wood (JS, BSc PRMD306, April 2006 - supervised JS - moderated PKD): Design and manufacture of the hub assembly
of a controllable pitch propeller in composite materials
Completions in 2005
- Michael Gerrard (JS, BEng Composites, April 2005): Design, manufacture and test of a composite karabiner
- Clara Moyano Mora (DCP, BEng Composites, April 2005): Corrosion study of
AA8090 Aluminium-Lithium alloy exposed to seawater environment
- Marcus Walls-Bruck (SMG, BEng Composites, April 2005): The effect of
moisture content on the properties of natural fibres, and the ‘long term’
effects of exposing the laminate to moisture
Completions in 2004
- Nathan Ball (SMG, BSc, April 2004): Next generation of composite protection plates for rally cars
- Justin Broome (JS, BSc Marine and Composites Technology, April 2004): The effects upon mechanical properties of a resin infused composite caused by altering flow and cure pressures during construction
- Oliver M Buzza (SMG, BSc MEDM, May 2004): Process development of void content calculation in advanced composite materials using optical image analysis
- Morgane Calves (SMG, Stage placement student from Ecole Polytechnique de Nantes, June 2004): Project on natural composites
- Richard Cullen (JS, BEng Composites, May 2004): Characterisation of natural fibre in the context of thermoset composite materials
- Shaun Davy (JS, BEng Composites, April 2004): Resin absorption of balsa core sandwich panels
- Dan Gardner (MMS, BSc, April 2004): Composites recycling
- Richard Fynan (JS, BSc Surf Science and Technology, April 2004): Environmental impact of composite use in the surf industry
- Greig Holloway (JS, HND Civil Engineering, April 2004): Reinforcement of concrete structures with fibre-reinforced polymer matrix composites
- Samuel Noble (TJS, BSc Surf Science and Technology, April 2004): Lantor Soric cores in resin transfer moulding
- Jean-Philippe le Nours (stage placement from IUT St Brieuc - France, April
2004 – June 2004): Natural fibres as reinforcements for polymer matrix
composites
- Steven Parish (JS, BSc MEDM, April 2004): Investigate the mechanics involved in the failure of composite materials and methods to prevent this occurring
- Adrien Perret (SMG, BEng Composites, April 2004): Comparison of the performance of the core-skin sandwich structures used in the snowboard industry
- John Pitt (SMG, BEng, April 2004): Hull structure analysis and design for a high performance motor yacht
- Edward Popham (SMG, BEng Composites, April 2004): Processing parameters for carbon skinned sandwich structures
- Timothy Stanhope (JS, BEng Composites, April 2004 [with Westland Helicopters Limited]): Analysis of failure modes experienced in composite materials as a result of
fatigue and static testing
- Richard Stark (JS, BSc, April 2004): Aerodynamic improvement of a ‘Quantum’ kit car.
- Nelson Tanner (JS, BSc Marine and Composites Technology, May 2004): Natural fibres as reinforcements for composite materials.
- Timothy Whybrow (TJS, BSc Marine and Composites Technology, May 2004): The mechanical properties of a unidirectional prepreg
- Christopher Worboys (SMG, BSc, April 2004): **
Completions in 2003
- Laurent le Cocq (stage placement from IUT St Brieuc - France, April 2003 –
June 2003): Sustainable composites: natural fibres in diverse resin systems
- Claire Davies (JS, BEng Composites, May 2003): ** A study of the degradation of flax reinforced composites in the marine environment
- Frederic Delhommeau (SMG, BSc, May 2003): ** Resin infusion
- Nicolas Fordos (SMG, BEng Composites, May 2003): ** Permeability in the resin infusion
process
- Daniel Gosden (JS, BEng Composites, May 2003): The effect of high pressure moisture absorption in carbon fibre composites
- Samuel Hoult (JS, BEng Composites, May 2003 [with Coherent Inc, Santa
Clara]): Diode laser curing of epoxy resins for composites
- Nicolas Joulia (SMG, BEng Composites, May 2003): Strength of sandwich panel ‘cut and fold’ joints (published in Advanced Composites Letters, 2003, 12(6), 243-246).
- Xavier Lavorel (JS, BEng Composites, May 2003): Optical fibre sensors embedded in composite materials - influences on the compression properties
- Mark Leggassick (SMG, BSc, May 2003): ** Optimising the design of honeycomb composite structures
- Andrew Linsley/James McGill (TJS, Foundation Year, June 2003): Mechanical properties of resin infusion moulded composites
- Carl Mirauer/Moses Ogunnaike (MMS/JSp, Foundation Year, June 2003): Viscosity of thermosetting resins
- Jonathan Perry/William Rogers (JS, Foundation Year, June 2003): Resin infusion moulding of natural fibre composites
- Hashim Salleh (JS, BEng Composites, May 2003): Void formation and transport in composite manufacturing
- David Simpson (JS, BEng Composites, May 2003): Forces required to form fabric materials into mould tool radii
- Ronan Talarmin (stage placement from IUT St Brieuc - France, April 2003 –
June 2003): Embedded optical fibre sensors in fibre-reinforced composite
materials
Completions in 2002
- Khirasaleh Abd Aziz (SMG, BEng Composites, June 2002): Commissioning of new pre-mixed resin transfer moulding (RTM) machine
- Jonathan Alsop (JS, BSc MEDM, June 2002): Corrosion of aluminium in the presence of carbon fibre
- Richard Butler (SMG, BSc MEDM, June 2002): Medical clamp for use in X-ray analysis
- Shukri Che Hassan (JS, BEng Composites, June 2002): Nondestructive testing (thermographic) of fibre reinforced composites
- William Harvey/Nicholas Leach (JS, Foundation, June 2002): Resin infusion of natural fibre composites
- Che Saupi Ismail (JS, BEng Composites, June 2002): Natural fibres as reinforcement for composite materials
- Mohd Bakif Ismail (JS, BEng Composites, June 2002): Laminate design for optimum toughness (impact test for impeller blade)
- Nathan March (JS, BSc MEDM, June 2002): Design and manufacture of a composite karabiner
- Jean-Baptiste Mouton (SMG, BEng Composites, June 2002): ** Comparison of resin infusion and autoclave
- Hamidom Ngah (JS, BEng Composites, June 2002): Microstructure and mechanical properties of woven fabric reinforced composites
- Sébastien Pau (JS, Stage placement from ENSTA Paris, April 2002 – June 2002): Effect of crimp on the mechanical properties of woven composites
- Patrick Ploé (JS, Stage placement from IUT St Brieuc, April 2002 – June 2002): Natural fibre/natural resin sustainable composites
- Md Fuzailee bin Sabu (SMG, BEng Composites, June 2002): Design of a composite road plate
Completions in 2001
- Jean-Baptiste Bacqué (JS, Stage placement from IUT St Brieuc, 17 April-16 June 2001): Bond between metals and carbon fibres
- Jean-Marie Dubot (JS, Stage placement from IUT St Brieuc, 17 April-22 June 2001): Characterisation of the mechanical behaviour of linseed fibres in composite materials
- Shaun Elliott (JS, BEng Composites, June 2001): ** design and prototype External Negative Pressure Ventilation (ENPV) device
- Ross Hawkins (JS, BEng Composites, June 2001): ** resistance to delamination as a function of consolidation pressure and an investigation of other contributing factors
- Mathieu Colin de Verdiere (TJS, BEng Composites, June 2001): ** analysis and design of a fibre mast
Completions in 2000
- Jens Baeckert (SMG, BEng Composites, May 2000): ** design of composite speed in-line skates
- KC Barnes (TJS, BSc MEDM 303, June 2000): ** composite chassis: design and manufacture
- Paul Clements (JS, BEng Composites, May 2000): ** microwave curing of advanced composite materials
- Jonathan Crewe (ME, Foundation Year, June 2000): ** bicycle brake handle
- Gareth Dimblebee (ME, Foundation Year, June 2000): ** design, manufacture and test a new skateboard platform
- Nathan Evans (JS, BEng Composites, May 2000): ** vibration in composite panels
- TN Gray (TJS, BSc MEDM 303, June 2000): ** composite manufacture of a dinghy hull
- Duncan Harper (JS, BEng Composites, May 2000): ** composite repair techniques
- David Hayes (ME, Foundation Year, June 2000): ** bicycle brake handle
- Oliver Jeffries (ME, Foundation Year, June 2000): ** design, manufacture and test a new skateboard platform
- Peter Kent (SMG/JS, BEng Composites, May 2000): ** springback in composites
- Radwan Labban (JS, BEng Marine Systems Technology, 2000): ** comparison of RIFT, vacuum bagging and hand laminate processes
- Marcus Leach (JS, BEng Composites, May 2000 [with DML, Plymouth]): ** correlation of flow mass and volume in RIFT
- RJ Nunney (DJG, BSc MEDM 303, June 2000): ** composite roll bar
- Noel O'Connel (JS, Foundation Year, June 2000): ** in-mould measurement of thickness during RIFT
- Veronique le Palud (JS, Stage placement from IUT Lannion, 17 April-16 June 2000):
** measurement of forces exerted by shape memory metals
- Richard Pietrasz (SMG, BEng Composites, May 2000 [with Derriford Hospital]):
** composites tissue clamp for medical x-ray analysis
- Olivier le Pointer (JS, Stage placement from IUT Lannion, 17 April-16 June 2000):
** assessment of Facet Stereo software on electron microscopes
- Shaun Pope (DS, BEng Composites, May 2000): ** canopies assessment
- Zaka Quraishi (ME, Foundation Year, June 2000): ** bicycle brake handle
- Mark Russell-Stevens (DJG/DCP, BEng Composites, May 2000):
Effects of elevated
temperature on ultimate tensile strength and failure modes of short carbon fibre
reinforced magnesium composite (published in Materials Science and
Technology, May 2002, 18(5), 501-506).
- Anthony Sayers (JS, BEng Composites, May 2000): ** carbon/steel adhesive bonding
- Stefan Schwingenschloegel (JS, BEng Composites, May 2000): ** design of composite connecting rod
- Daniel Smith (SMG, BEng Composites, May 2000): ** finite element analysis of composite monocoque cycle frame
- Andy Tate (JS, BSc Marine Technology and Astronomy, 2000): ** heat conduction of composite oil pipes
- Rosario Testa (SMG, BEng Composites, May 2000): ** composite car body panel
- John Wedlake (DJG, BEng Composites, May 2000): ** lift wheel sensor
Completions in 1999
- Sebastian Alberto (SMG, BEng Composites, May 1999 [with McLaren Cars]):
Sandwich structure study
- Michael Beck (JS, BEng Composites, May 1999): Modelling of woven fabrics for prediction of resin flow
- Benoit Billet (SMG, BEng Composites, May 1999): Design and manufacture of a racing unicycle
- Julian Bleddyn (JS, BEng Composites, May 1999 [with Marine Projects Plymouth
Limited]): Analysis of window mullions on motor yachts
- Marcello Coppola (JS, BEng Composites, May 1999): The RIFT process: a comparison of innovative resin infusion manufacturing processes for composite materials with
traditional hand lamination
- Laurent Gauthier (SMG, BEng Composites, May 1999): Design and manufacture of a composite karrabiner
- Stuart Gill (MNJ, BEng Composites, May 1999): Variation of fracture toughness and microstructure in an 8090 extrusion
- Simon Hardy (JS, BEng Composites, May 1999): An investigation into repair methods for fibre reinforced plastics materials
- Hugo Heesterman (TJS, BEng Composites, May 1999): High properties fins
- Richard Machray (ERM, BEng Composites, May 1999): Pro-Mechanica/Motion for the analysis of piston crank mechanisms
- Myrddin Pengelly (DJG, BEng Composites, May 1999): Waterproof pool table cloth
- Paul Phillips (SMG, BEng Composites, May 1999 [with McLaren Cars]): FEA of
hard pads in composite sandwich structures
- Christopher Reinke (SMG, BEng Composites, May 1999 [with McLaren Cars]):
Design and manufacture of a lightweight air jack for race cars
- Jonathan Smith (SMG, BEng Composites, May 1999): ** design of impact resistant composites
- Yann Talibart (SMG, BEng Composites, May 1999): Viability study of FRP windsurfing front end boom
- James Thatcher (TJS, BEng Composites, May 1999): Manufacture and testing of thin composite marine propeller blades
- Dominic Vigni (SMG, BEng Composites, May 1999): Composite motor sport steering wheel
- Liam Walker (SMG, BEng Composites, May 1999 [with McLaren Cars]): Punch out
of inserts
Completions in 1998
- Harry Abd Rashid (SMG, BEng Composites, May 1998): Effect of high-temperature on composite to metal joints
- Azhar Abidin (JS, BEng Composites, May 1998 [with Jotun Polymer]): Foaming resin as matrix for reinforced plastics
- Robin Chatterjee (SMG, BEng Composites, May 1998): ** Finite element analysis
- Paul Clements (JS, HND, June 1998): The design and manufacturing process for aerodynamically profiled carbon fibre cycling handlebars
- David Coley (JS, HND, June 1998): Carbon fibre motorcycle frame
- Tanja Cotic (SMG, BEng Composites, May 1998): Manufacturing of honeycomb structures by the RIFT-process
- Vincent de Bimard (JS, BEng Composites, May 1998): Design and manufacturing of a human powered hydrofoil aft system
- Justin Elliott (JS, BEng Composites, May 1998): Galvanic corrosion in carbon-aluminium composites
- David Green (SMG, BEng Composites, May 1998): Investigation into fibre optic smart composites for damage detection in a low cost application
- Peter Grist (TJS, BEng Mechanical, May 1998): Finite element prediction of the deformation of an elastically tailored propeller
- David Irving (JS, BEng Composites, May 1998): Hollow composite parts by RTM
- Dimitris Katsanis (JS, BEng Composites, May 1998): Damage detection and evaluation of its extent on composite structures using modal analysis
- James Llewelyn (JS, BEng Composites, May 1998 [with GKN Technology]): Composite driveshafts
- Joanne Nicholls (MNJ, BEng Composites, May 1998 [with BAe SEMA Filton]): Investigation into underwater nail gun attachments
- DB Parkinson (SMG, HND, June 1998): ** (Non)-destructive tests on composites
- Chris Payne (JS, BEng Composites, May 1998 [with MoD DCTA Colchester]): Composite body armour
- Herve Pereyrol (JS, BEng Composites, May 1998): Water bike propulsion system
- Matthew Price (JS, BEng Composites, May 1998 [with GKN Westland Aerospace IoW]): The development of methods to stabilise/reinforce honeycomb cores to manufacture composite sandwich panels
by cost-effective techniques
- Jago Pridie (JS, BEng Composites, May 1998): The design, manufacture and test of a hydrofoil for a human powered vehicle
- Jed Richter (SMG, BEng Composites, May 1998): Finite element modelling of thermal distributions in heated composite tooling
- Bill Robson (TJS, HND, June 1998): ** Carbon fibre dinghy masts
- MJ Rookes (SMG, HND, June 1998): ** Composite materials
- Anthony Sayers (JS, HND, June 1998): Composite canoe paddle
- Kamaludin Tomiran (JS, BEng Mechanical, May 1998): Topology of a fabric reinforcement for carbon fibre twill 2x2
- RW Wadsworth (SMG, HND, June 1998): ** Composite materials
- Darren Young (SMG, BEng Composites, May 1998): Analysis and modelling RTM composites - a study into the effective use of
π7 as a mould design
- Hanapi Yusof (TJS, BEng Composites, May 1998): Laminate design for optimum toughness
Completions in 1997
- Austin Booth (SMG, BEng Composites, May 1997): Mechanical testing and FEM in the analysis of a composite chassis
- Emmanuel Calvez (SMG, BEng Composites, May 1997): Moisture absorption/fatigue of glass reinforced resins
- Guillaume Dijon (JS, Visitor from Rouen - France, June 1997): Topology of some carbon fibre fabrics
- Dylan Harries (JS, BEng Composites, May 1997): Composite repair
- Thomas E Lunn (May 1997): Performance of composites in an oil environment
- Abd Rahman Omar-Bakkar (JS, BEng Mechanical, May 1997): Drape of a reinforcement fabric
- Jonathan Payne (SMG, BEng Composites, May 1997): An investigation into T-terminals in carbon fibre dinghy masts
- J Sedgwick: Design of lightweight radar structure for the Severn class lifeboat
- Terry Smith (SMG, BEng Composites, May 1997): Embedded fibre optics in RTM manufactured material for penetrative damage detection
- Dan South (JS, BEng Composites, May 1997): Effect of high pressure cyclic immersion of FRP in water
- Richard Tarr (SMG, BSc Technology, May 1997): Investigation into resin systems for infusion processing
Completions in 1996
- Matt Badman (SMG, BEng Composites, 1996): ** Open learning materials for composites industry
- William Cazzaniga (JS, HND2, June 1996 [with McLaren Cars]): Peel ply
- Richard Clayton (DCP, BEng Composites, 1996): ** Corrosion of stainless steel
- Kathryn A Coventry (DS, MPhil/PhD transfer, January 1996): The engineering and geological properties of Devon’s soils in earthen building
- Robert Cumming (SMG, BEng Manadon, 1996): ** Envirocar chassis (team project)
- Frederic Daubin (JS, BEng Composites, 1996): ** Microwave curing of resins
- Andrew Gothard (SMG, BEng Manadon, 1996): ** Envirocar chassis (team project)
- Anthony Guilbaud (JS, BEng Composites, 1996): ** Monitoring resin flow in closed moulds
- Barry Harvey (IMS Manadon 1996): ** D-form propeller
- Nick Haywood (SMG, BEng Composites, 1996): ** Pulsed resin RTM
- Matthew Hocking (SMG, BEng Composites, 1996): ** Low-temperature cured resins for DML
- Toby Jefferson (JS, BEng Manadon, 1996): The surface topology and internal geometry of reinforcement fabrics for composites
- Jerome Lauvige (SMG, BEng Composites, 1996): ** Ballistic response of composites
- Stephane Mahdi (JS, BEng Composites, 1996): Calibration of C-scan ultrasound system
- Amanda McIntyre (JS, BEng Composites, 1996): Topology of a fabric reinforcement
- Tracy Mills (DAS, BEng Composites, 1996): ** Preparation of thin foils for TEM
- Oliver Novakovic (Institute of Marine Studies, 1996): ** Fire performance of composites
- David O'Shaugnessy (SMG, BEng Manadon, 1996): ** Envirocar chassis (team project)
- Mark Parry (JS, BEng Manadon, 1996): An investigation into the use of flax fibres as a reinforcement for epoxy composites
- Chris Patterson (Institute of Marine Studies, 1996 [with Saracen Cycles]): Design of a man powered hydrofoil craft
- Jason Peet (DS, BEng Composites, 1996 [with Royal National Lifeboat Institute]): Feasibility study for a composite mast for the Severn class life boat
- Matthew Price (SMG, HND2, June 1996): Design, manufacture and market feasibility of a mountain bike composite cantilever brake set
- Jago Pridie (Institute of Marine Studies 1996 [with Saracen Cycles]): Human powered hydrofoil design
- James Rintoul (SMG, HND2, June 1996): **
- Leon C Sears (DS/TJS, Institute of Marine Studies, 1996): The application of composites for main engine output shafts
- Mark Selway (JS, BEng Manadon, 1996): Environmental effects on monolithic composites and their bonded joints
Completions in 1995
- Arif Al-Alawi (JS, BEng Mechanical, June 1995): Differential scanning calorimetry on resin materials
- Andy Bishop (SMG, BEng Composites, June 1995): ** Optimisation of model boat hulls
- Robin Chatterjee (SMG, BEng Composites, June 1995): ** Finite element analysis of propeller blades
- Kieran Collins (JS, HND2, 1995): ** Composite swing-arm
- Liam Doyle (JS, HND2, 1995): ** Composites seatpost and saddle
- Mike Felstead (JS, BEng Composites, June 1995): Flax and linseed fibres as reinforcement for epoxy composites
- Alan E L Holman (DJG/DS, MPhil/PhD transfer, May 1995): High strength spring steels for automotive suspension coil springs
- David Jenkins (DS/SMG, HND2, 1995): ** Composite bicycle wheel
- David Jones (SMG, HND2, 1995): ** Forming nylon tubes
- James Letto (JS, HITECC, 1995 [joint report with Robin Siddall]): Composite materials research project: topology of reinforcement fabrics
- Dave Marshall (SMG, BEng Mechanical, June 1995): ** Composite floor pan for offroad vehicle
- Bertrand Thibault (DS, BEng Composites, June 1995): Fatigue of composite materials in wet environments
- Pascal Trichereau (SMG, BEng Composites, June 1995 [with Halyard M&I]): ** RTM development
- Robin Siddall (JS, HITECC, 1995 [joint report with James Letto]): Composite materials research project: topology of reinforcement fabrics
- Nigel Williams (DS/SMG, BEng Composites, June 1995): Composite springs
Completions in 1994
- Dean Basford (SMG, BEng Composites, June 1994): Relationship between mechanical
performance and microstructure in composites fabricated with flow-enhancing fabrics (published in Composites, September 1995, 26(9), 675-679.
- C Bloomfield (HND 1994 [joint project with N Meekley]): Motorcycle chassis
- Sarah Bucknell (DS, BEng Composites, June 1994): Composite re-blading system for an outboard propeller
- Jim Craen (DCP, BEng Composites, June 1994): The high temperature structural integrity of metal matrix composites
- Sylvain Desert (DCP, BEng Composites, June 1994): **
- Gary Dunbar (DCP, BEng Mechanical, June 1994): Wear properties of Al/SiCp
- Steve Kelly (SMG, BEng Composites, June 1994): **
- Heather Kirby (DS/TJS, BEng Composites, June 1994): Propeller trials report: load cell project
- Harold Kleeven (JS, Visitor from Venlo - Netherlands, December 1994): Thermal conductivity analysis of two epoxy resin systems
- Owen McGinn (BEng Composites, June 1994): EDM machining of metal matrix composites
- N Meekley (HND 1994 [joint project with C Bloomfield]): Motorcycle chassis
- D Metson (HND 1994): Design and analysis of a composite ladder
- Neil Pearce (JS, BEng Composites, June 1994): The compressibility of a reinforcement fabric (published in Composites Manufacturing, March 1995, 6(1), 15-21).
- Neil Sweeney (MAB, BEng Composites, June 1994): **
- Adam Sweet (JS, BEng Composites, June 1994): The influence of reinforcement architecture on fibre bed permeability
- Andrew Tate (DS/TJS/JC, BSc Marine Technology, May 1994): Propeller shaft A-brackets in composite materials
- Ian Taylor (JS/DS, BEng Mechanical, June 1994): Flexible resin infusion under vacuum
- Kevin Walter (JS, BEng Composites, June 1994 [with Williams Grand Prix Engineering]): Characterisation of bulk moulding compound and carbon fibre ‘prepreg’ composites
Completions in 1993
- Mark Anderson (JS, BEng Composites, June 1993 [with Jotun Polymer]): Foaming resin as the matrix in reinforced plastics
- Howard Bradfield (DS, BEng Composites, June 1993): Modelling and investigation into a composite marine propeller
- Sarah Bradley (SMG, BEng Composites, June 1993): Optimisation of cure cycling in the autoclave
- Peter Bray (DS, BEng Composites, June 1993): An investigation of the attachment strength of Bighead fasteners to a post-cured laminate
- Joachim Gingele (MEM, BEng Composites, June 1993 [with Standard Products]): Process improvement with design of experiments: application of the Shainin techniques on a rubber moulding process
- Julian Hines (TJS/JC/DS, BSc Marine Technology, 1993): Structural analysis of marine composite propellers
- Matthew Hocking (SMG, HND June, 1993): How the crystallinity of thermoplastics varies with thermal history
- Nigel Kyle (DS/TJS/JC, BSc Marine Technology, April 1993): Impact tests of composite foils applied to hydrofoils
- Martin Loram (JS, BEng Mechanical, June 1993): Calibration of a C-scan
- Stephen Main (JS, BEng Composites, June 1993 [with Vosper Thornycroft]): Adhesive bonding over large areas
- Peter Richards (JWB, June 1993): Feasibility of non-metallic materials for fracture fixation
- MJ Robinson (MEM, BEng Mechanical, June 1993): The design and planning of a resin transfer moulding process using a computer factory simulation
- Neil Titchener (DCP, BEng Composites, June 1993): Stress corrosion of an aluminium 2618 SiCp alloy
- Robert Weker (SMG, BEng Composites, June 1993 [with Flexadux]): An investigation into the use of carbon powder in GRP composites for antistatic applications
- R White (DS, HND, June 1993): Carbon fibre composite concept bike
- Christopher Williams (SMG, BEng Composites, June 1993 [with Flight Refuelling]): Adhesive joint optimisation
Completions in 1992
- Wendy Bateman (BEng Composites May 1992): Taguchi methods
- Giles Beauchamp (BEng Composites May 1992): A study of the composite alternatives to domestic timber roof trusses
- Richard Bland (BEng Composites May 1992): Materials for loudspeaker enclosures
- Jorg Bodmer (BEng Composites May 1992 [Ulm Tech Hochschule exchange student]): Resin transfer moulding: permeability evaluation of fibre reinforcement
- Sarah Bucknell (DS, HND June 1992): Variation of mechanical properties with orientation for a plate laminate
- Linda Fellowes (BEng Composites May 1992): Finite element analysis
- Ulrike Freitag (BEng Composites May 1992 [Ulm Tech Hochschule exchange student]): Experiment-based evaluation of Taguchi methods
- Ian Gatehouse (BEng Composites May 1992): Investigation into the effect of an additional polymer coating on the surface of a laminate on its damage tolerance
- Graham Halstead (BEng Composites May 1992 [with Williams Grand Prix Engineering]): Redesign of a racing car lever in advanced composites for compression moulding
- Matthew Lyne (BEng Mechanical May 1992): An investigation into the failure of inserts (Bigheads) within composite plates
- Paul MacKenzie (BEng Composites May 1992): An experimental analysis of pressure within a mould during resin transfer moulding
- Charlotte Smith (BEng Composites May 1992 [with British United Shoe Machinery]): Use of composites in shoe manufacturing machinery
- Jonathan Tallis (BEng Composites May 1992): Manufacture of wheels for a powered wheelchair
- Lewis Thomas (BEng Composites May 1992): Examination of the factors affecting the acoustic properties of composite materials
Completions in 1991
- Richard Beech (BEng Composites 1991): Optimised factory lay-out for sandwich panel production
- Chris Bennett (BEng Mechanical 1991): Manufacture of fibre composites using vacuum bag techniques
- Terence Chang (BEng Systems 1991): Robot end effector for handling reinforcement fabrics
- Matthew Greer (BEng Composites 1991): Development of an efficient personal transport vehicle
- Mark Rowe (BEng Composites 1991): Effect of inserts on the flow paths in RTM
- Tim Searle (BSc Marine Technology 1991): Fibre reinforced plastics marine propeller
- Mark Siu (HND 1991): Infrared heating of glass fibre/polypropylene prepreg
- Nigel Stuart (HND 1991): Materials used on skegs
- David Surphlis (BEng Composites 1991): Experimental analysis of the pressure distribution during RTM
- Stephen Tarr (HND 1991): Property degradation in glass/polypropylene after thermofolding
- Steven Ward (HND 1991): Production of steering wheels
- Peter Wilson (BEng Composites 1991): Windsurf component manufacturing techniques
Completions in 1990
- A Brown (HND June 1990): Calibration of an ultrasonic C-scan system for composites
- Stephen Church (BEng May 1990): Systems technology for engineered preforms
- Peter Evans (BEng May 1990): Optimisation of the RTM process
- Patrick Griffin (BEng May 1990): RTM flow visualisation and quantification
- Simon James Handley (BEng May 1990 [was Commercial-in-Confidence to 1995]): Cavitation erosion of composite materials
- Simon Hickman (BEng May 1990): Optimisation of bagging processes
- Helmut Klier (BEng May 1990 [Ulm Tech Hochschule exchange student]): Design, manufacture and testing of laminates to show coupling effects
- Rupert William Edward Ladds (BEng May 1990 [was Commercial-in-Confidence to 1995]): Cavitation characteristics of composite materials
- Julian S Leam (HND June 1990): An investigation into the design of a small modular boat
- Christian Lugauer (BEng May 1990 [Ulm Tech Hochschule exchange student]): Design, manufacture and testing of laminates to show coupling effects
- David Parsons (BEng May 1990 [with Water Research Centre]): Residual styrene in GRP water pipes
- OE Power (HND June 1990): Investigation into small modular boats tenders
Completions in 1989
- WJ Boggia (BEng May 1989): Ultrasonic cure characterisation of epoxide resins
- Phillip Brown (BEng May 1989): A numerical model for the flow of resin in a closed mould
- Ian Gatehouse (HND June 1989): Flow visualisation in resin transfer moulding
- Michael J Ianson (HND June 1989): Magnetic attenuation through materials of different composition
- RN Jackson (BEng May 1989): An introduction to fibre preforming
- Dennis Littlejohn (BEng May 1989): Investigation of filament winding techniques of fibre reinforced thermoplastic tape using hot air guns and infra-red heating
- AL Speechley (BEng May 1989): ** Laminate analysis and finite element method
- Simon West (HND June 1989): Composite material preforms
- Nigel S Wright (BEng May 1989): An investigation into the drape of reinforcement fabrics
Completions in 1988
- Christopher J Barber (BEng May 1988): Evaluation of impact performance of carbon fibre reinforced plastics with lay-up geometry
- Ian Chatting (BEng May 1988): An investigation into an aircomb technique for spreading and mixing tows of continuous composite reinforcement fibres
- Clare Garrett (HND June 1988): Corrugation of carbon fibre reinforced plastics
- Ian Henshaw (HND June 1988): Gelling characteristics of epoxy resin
- Mark Howard (HND June 1988): Carbon fibre/nylon composite investigation
- Peter Kent (BEng May 1988): Design and assessment of a hot air gun for continuous fibre reinforced thermoplastic filament winding
- David Oliver (BEng May 1988): ** Polymer flow modelling for the moulding of composite plates
- Sam D Park (HND June 1988): Manufacture of glass fibre reinforced thermoplastic
- Timothy J Quick (BEng May 1988): PAFEC finite element analysis of fibre composite materials
- Russell Shaw (HND June 1988): Matched mould fabrication of thermosetting laminates
- Jim P Sinden (BEng May 1988): Fracture processes and failure prediction of carbon fibre reinforced epoxy in three-point loading
- Tim J Sparkes (BEng May 1988): Investigation of a hot air welding technique for the tape laying of reinforced thermoplastics
Completions in 1987
- Graeme Barnes (May 1987): An investigation into the 'aircomb' as a technique for spreading fibres
- AT Ibrahim (May 1987): Thermal stresses in composite materials
- SJ Pearce (May 1987): Investigation into the processability of fibre reinforced thermoplastic polyurethane
- JCM Philipson (May 1987): A study of the properties of tennis racket strings
Completions in 1986
- JM Colston (February 1986): Investigation into impact testing of thermoplastic
- J StJ Lancaster (May 1986): Investigation into instrumented impact testing of thermoplastic composites
- MA Laptin (May 1986): Lowering the unit costs of Luneberg lenses
- Jacqueline Northam (May 1986): Investigation into the properties of reinforced polyurethane
- Sonam T Pratten (May 1986): Design and manufacture of a [composite material] slipper piston
- D Purcell (HND March 1986): The hardness testing of plastics
- S Rushton (HND March 1986): Tensile behaviour of polymers
- T Springham (April 1986): The test and analysis of fibre reinforced composite materials
- Paul U Thomas (April 1986): Composite sail materials
- S Taylor (May 1986): Coating carbon fibres with thermoplastic
- FG Turner (June 1986): Investigation into the crystallinity of externally stressed high-density polyethylene
- A Webber (May 1986): Investigation into friction and wear of carbon fibre epoxy
Completions in 1985
- SS Al-Jabeiri (May 1985): Investigation into friction forces on polymeric cantilever vanes
- HSS Badaam (May 1985): Investigation into the wear of polymeric materials
- M Korneliussen (March 1985): Comparison of welded and adhesive joints of thermoplastic polymers
- JD Pickles (March 1985): To produce a tube in fibre reinforced thermoplastic
- JC Prichard (May 1985): Butt welding of polyethylene
- W Reeves (HND, March 1985): Ultrasonic nondestructive testing performance on land and underwater
Completions in 1984
- James Barrie (May 1984): The deterioration of GRP in seawater
- PD Campbell (May 1984): Stress relaxation and creep in polymers
- AR Dehbozorgi (March 1984): Welding of plastics
- Arman A Gurtan (PhD candidate 18 October 1984): Fabrication of high-performance composites by vacuum impregnation (MoD contract 2021/011/MVEE)
- W Lee (May 1984): Cavitation damage in glass reinforced plastics
- Kissoon Singh (March 1984): Welding of plastics
- ASY 'Tony' To (May 1984): Volume fraction determination of composite materials
Completions in 1983
- AM Al-Kindy (February 1983): Torsion test of composites
- Al-Jabieri (February 1983): Ultrasonic tests
- Simon Broadhurst (March 1983): Welding joints in Makrolon 8020
- Abdullah Arman Gurtan (May 1983): Properties of thermal insulation in a helium atmosphere under pressure and application of insulation to a hyperbaric chamber
- Jeffrey S Ridgley (May 1983): An investigation into nondestructive testing of a proprietary thermosetting plastic bearing material
- Mokhtar Toorneini (April 1983): Thermal welding joints in polyethersulphone
Completions in 1982
- Peter Francis Best (April 1982): Vacuum assisted resin injection
- Andrew David Billowes (February 1982): An investigation into the deflection characteristics and properties of various symmetrical and asymmetrical cantilevers
- Alnoor FM Jaffer (May 1982): Strain rate sensitivity of high density polyethylene
Completions in 1981
- Roger James Allen (April 1981): Resin impregnation of thick section high glass content fibre composites
- Benourine Benomar (May 1981): Strain rate sensitivity of high density polyethylene
- Andrew Franks Davies (February 1981): Investigations into some effects of temperature on the strain rate behaviour of high density polyethylene
- Andrew Simon Osbourne (April 1981): Testing of wooden joints
- Anthony William Stankus (June 1981): Investigation into the measurement of changes due to a marine environment of a commercially produced glass reinforced plastic
Completions in 1980
- A Badri (1980): Buckling of GRP channel section
- Peter F Best (January 1980): Galvanic corrosion protection of steel in sea water
- Andy M Headdon (February 1980): Magnetic particle crack detection
- Nasruddin B Pawanteh (May 1980): Impact tests on composite materials
- AJ Wood (April 1980): Investigation of fatigue damage in glass-fibre reinforced plastic
Completions in 1979
- MSM Al-Romaithi (May 1979): Instrumentation for torsion test
- NK Edwards (March 1979): The variation of 'E' and other properties of a plain carbon steel
- Kaveh Kazemi (March 1979): Measurement of elastic modulus
- SHB Syed-Wazir (April 1979): Investigation into the compressive properties of rigid polyurethane foam
Completions in 1977
- TR Mackie (February 1977): Electrochemical corrosion of metals
Completions in 1976
- SJ Williams (June 1976): Ultrasonic techniques for glass fibre properties
Completions in 1975
- AJ Taylor (April 1975): To
investigate quality of glass reinforced plastic using X-ray radiation
Completions in 1973
- DW Vogwell (June 1973): The viscosity measurement of glass at high temperatures
No earlier records available
Return to MATS 324 home page
Created by John Summerscales on 27 April 2006 and updated on
15 December 2011 17:56. Terms and conditions. Errors and omissions. Corrections.