| Standard |
Test |
Status |
BSOL |
| |
|
|
|
| |
Constituent fibre specifications and test method standards |
|
|
| BS ISO 1887:1995 |
Textile glass. Determination of combustible-matter content |
|
ü |
| BS ISO 1888:1996 |
Textile glass. Staple fibres or filaments. Determination of average
diameter |
|
ü |
| BS EN ISO 1889:1997 |
Reinforcement yarns. Determination of linear density |
|
ü |
| BS EN ISO 1890:1997 |
Reinforcement yarns. Determination of twist |
|
ü |
BS EN ISO 2078:1995
BS 946-2:1995 |
Textile glass. Yarns. Designation |
|
ü |
| BS ISO 3341: 2000 |
Textile glass. Yarns. Determination of breaking force and breaking
elongation |
|
ü |
| BS EN ISO 9163:2005 |
Textile glass. Rovings. Manufacture of test specimens and determination
of tensile strength of impregnated rovings |
|
ü |
| BS ISO 9291:1996 |
Textile-glass-reinforced plastics. Rovings. Preparation of
unidirectional plates by winding |
|
ü |
ISO 10119:2002
(BS 7658-1:1993) |
Carbon fibre. Determination of density |
|
ü |
ISO 10120:1991
(BS 7658-2:1993) |
Carbon fibre. method for the determination of linear density |
|
ü |
| BS ISO 10371:1993 |
Fibre reinforced plastics. Braided tapes for composite materials
reinforcement. Basis for a specification |
|
ü |
| BS EN ISO 10548:2003 |
Carbon fibre. Determination of size content |
|
ü |
| BS EN ISO 10618:2004 |
Carbon fibre. Determination of tensile properties of resin-impregnated
yarn |
|
ü |
| BS ISO 11566:1996 |
Carbon fibre. Determination of the tensile properties of single-filament
specimens |
|
ü |
| BS ISO 11567:1995 |
Carbon fibre. Determination of filament diameter and cross-sectional
area |
|
ü |
| BS EN ISO 13002:1999 |
Carbon fibre. Designation system for filament yarns |
|
ü |
| BS EN 13002-2:1999 |
Carbon fibre yarns. Test methods and general specifications |
|
ü |
| BS EN 13003-1:1999 |
Para-aramid fibre filament yarns. Designation |
|
ü |
| BS EN 13003-2:1999 |
Para-aramid fibre filament yarns. Methods of test and general specifications |
|
ü |
| BS EN 13003-3:1999 |
Para-aramid fibre filament yarns. Technical specifications |
|
ü |
| BS ISO 10371:1993 |
Fibre reinforced plastics. Braided tapes for composite materials
reinforcement. Basis for a specification |
|
ü |
| BS EN 13417-1:2001 |
Reinforcement. Specifications for woven fabrics. Designation |
|
ü |
| BS EN 13417-2:2001 |
Reinforcement. Specifications for woven fabrics. Methods of test and
general requirements |
|
ü |
| BS EN 13417-3:2001 |
Reinforcement. Specifications for woven fabrics. Specific Requirements |
|
ü |
| BS EN 13473-1:2001 |
Reinforcement. Specifications for multi-axial multi-ply fabrics.
Designation |
|
ü |
| BS EN 13473-2:2001 |
Reinforcement. Specifications for multi-axial multi-ply fabrics. Methods
of test and general requirements |
|
ü |
| BS EN 13473-3:2001 |
Reinforcement. Specifications for multi-axial multi-ply fabrics.
Specific requirements |
|
ü |
| BS EN 14020-1:2002 |
Reinforcements. Specification for textile glass rovings. Designation |
|
ü |
| BS EN 14020-2:2002 |
Reinforcements. Specification for textile glass rovings. Methods of test
and general requirements |
|
ü |
| BS EN 14020-3:2002 |
Reinforcements. Specification for textile glass rovings. Specific
requirements |
|
ü |
| BS EN 14118-1:2003 |
Reinforcement. Specifications for textile glass mats (chopped strand and
continuous filament mats). Designation |
|
ü |
| BS EN 14118-2:2003 |
Reinforcement. Specifications for textile glass mats (chopped strand and
continuous filament mats). Methods of test and general requirements |
|
ü |
| BS EN 14118-3:2003 |
Reinforcement. Specifications for textile glass mats (chopped strand and
continuous filament mats). Specific requirements |
|
ü |
| BS ISO 15039:2003 |
Textile-glass rovings. Determination of solubility of size |
|
ü |
| BS ISO 15100:2000 |
Plastics. Reinforcement fibres. Chopped strands. Determination of bulk
density |
|
ü |
| |
|
|
|
| |
Compound specification and test methods |
|
|
| BS ISO 8605:2001 |
Textile-glass-reinforced plastics. Sheet moulding compound (SMC). Basis for specification |
|
ü |
| BS EN ISO 10352:1997 |
Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area |
UOP Library |
ü |
| BS EN ISO 11667:2000 |
Fibre reinforced plastics. Moulding compounds and
prepregs. Determination of resin, reinforcement-fibre and mineral-filler
content. Dissolution methods |
|
ü |
| BS EN ISO 12114:1997 |
Fibre-reinforced plastics. Thermosetting moulding
compounds and prepregs. Determination of cure characteristics |
|
ü |
| BS EN ISO 12115:1997 |
Fibre-reinforced plastics. Thermosetting moulding
compounds and prepregs. Determination of flowability, maturation and
shelf life |
|
ü |
| BS EN 12575:1998 |
Plastics. Thermoset moulding compounds.
Determination of the degree of fibre wet out in SMC |
|
ü |
| BS EN 13677-2:2003 |
Reinforced thermoplastic moulding compounds.
Specification for GMT. Methods of test and general requirements |
|
ü |
| BS EN 13677-3:2003 |
Reinforced
thermoplastic moulding compounds. Specification for GMT. Specific
requirements |
|
ü |
| BS EN 13706-1:2002 |
Reinforced plastics composites. Specifications for
pultruded profiles. Designation |
|
ü |
| BS EN 13706-2:2002 |
Reinforced plastics composites. Specifications for
pultruded profiles. Method of test and general requirements |
|
ü |
| BS EN 13706-3:2002 |
Reinforced
plastics composites. Specifications for pultruded profiles. Specific
requirements |
|
ü |
| BS EN 14447:2005 |
Fibre reinforced plastics. Glass mat reinforced
thermoplastics (GMT). Determination of flowability and solidification |
|
ü |
| BS EN 14598-1:2005 |
Reinforced thermosetting moulding compounds.
Specification for sheet moulding compound (SMC) and bulk moulding
compound (BMC). Designation |
|
ü |
| BS EN 14598-2:2005 |
Reinforced
thermosetting moulding compounds. Specification for sheet moulding
compound (SMC) and bulk moulding compound (BMC). Methods of test and
general requirements |
|
ü |
| BS EN 14598-3:2005 |
Reinforced thermosetting moulding compounds.
Specification for sheet moulding compound (SMC) and bulk moulding
compound (BMC). Specific requirements |
|
ü |
| BS ISO 15034:2000 |
Composites. Prepregs. Determination of resin flow |
UOP Library |
ü |
| BS ISO 15040:1999 |
Composites. Prepregs. Determination of gel time |
UOP Library |
ü |
| |
|
|
|
| |
Test plate manufacture |
|
|
| BS ISO 1268-1:2001 |
Fibre-reinforced plastics. Methods of producing test plates. General conditions |
|
ü |
| BS ISO 1268-2:2001 |
Fibre-reinforced plastics. Methods of producing test plates. Contact and spray-up moulding |
|
ü |
| BS ISO 1268-3:2000 |
Fibre-reinforced plastics. Methods of producing test plates. Wet compression moulding |
|
ü |
| BS ISO 1268-4:2005 |
Fibre-reinforced plastics. Methods of producing test plates. Moulding of prepregs |
|
ü |
| BS ISO 1268-5:2001 |
Fibre-reinforced plastics. Methods of producing test plates. Filament winding |
|
ü |
| BS ISO 1268-6:2002 |
Fibre-reinforced plastics. Methods of producing test plates. Pultrusion moulding |
|
ü |
| BS ISO 1268-7:2001 |
Fibre-reinforced plastics. Methods of producing test plates. Resin transfer moulding |
|
ü |
| BS ISO 1268-8:2004 |
Fibre-reinforced plastics. Methods of producing test plates. Compression moulding of SMC and BMC |
|
ü |
| BS ISO 1268-9:2003 |
Fibre-reinforced plastics. Methods of producing test plates. Moulding of GMT/STC |
|
ü |
| BS ISO 1268-10:2005 |
Fibre-reinforced plastics. Methods of producing test plates. Injection moulding of BMC and other long-fibre compounds. General principles and moulding of multipurpose test specimens |
|
ü |
| BS ISO 1268-11:2005 |
Fibre-reinforced plastics. Methods of producing test plates. Injection moulding of BMC and other long-fibre moulding compounds. Small plates |
|
ü |
| |
|
|
|
| |
Composite material mechanical test methods |
|
|
BS EN ISO 527-1:1996
BS 2782-3:Method 321:1994 |
Plastics.
Determination of tensile properties. General principles |
UOP Library |
ü |
BS EN ISO 527-2:1996
BS 2782-3:Method 322:1994 |
Plastics.
Determination of tensile properties. Test conditions for moulding and
extrusion plastics |
UOP Library |
ü |
BS EN ISO 527-3:1996
BS 2782-3:Method 326E:1995 |
Plastics.
Determination of tensile properties. Test conditions for films and
sheets |
UOP Library |
ü |
BS EN ISO 527-4:1997
BS 2782-3:Method 326F:1997 |
Plastics.
Determination of tensile properties. Test conditions for isotropic and
orthotropic fibre-reinforced plastic composites |
UOP Library |
ü |
BS EN ISO 527-5:1997
BS 2782-3:Method 326G:1997 |
Plastics. Determination of tensile properties. Test conditions for unidirectional fibre-reinforced plastic composites |
|
ü |
| BS EN ISO 899-1:2003 |
Plastics. Determination of creep behaviour. Tensile creep |
UOP Library |
ü |
| BS EN ISO 899-2:2003 |
Plastics. Determination of creep behaviour. Flexural creep by three-point loading |
|
ü |
| BS ISO 13003:2003 |
Fibre-reinforced plastics. Determination of fatigue properties under cyclic loading conditions |
|
ü |
| BS EN ISO 14125:1998 |
Fibre-reinforced plastic composites. Determination of flexural properties |
UOP Library |
ü |
| BS EN ISO 14126:1999 |
Fibre-reinforced plastic composites. Determination of compressive
properties in the in-plane direction |
UOP Library |
ü |
| ISO/DIS 14127 (98/122472DC) |
Composites. Determination of resin, fibre and void content of composites reinforced with carbon fibre |
|
û |
| BS EN ISO 14129:1998 |
Fibre-reinforced plastic composites. Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the ± 45° tension test method |
UOP Library |
ü |
| BS EN ISO 14130:1998 |
Fibre-reinforced plastic composites. Determination of apparent interlaminar shear strength by short-beam method |
UOP Library |
ü |
| BS ISO 15024:2001 |
Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, Gic, for unidirectionally reinforced materials |
UOP Library |
ü |
| ISO 15310:2005 |
Reinforced plastics. Determination of the in-plane shear modulus by the
plate twist method |
UOP Library |
ü |
| |
|
|
|
| |
Composite material thermal test methods |
|
|
| BS EN ISO 11357-1:1997 |
Plastics. Differential scanning calorimetry (DSC). General principles |
UOP Library |
ü |
| BS ISO 11357-2:1999 |
Plastics. Differential scanning calorimetry (DSC). Determination of glass transition temperature |
UOP Library |
ü |
| BS ISO 11357-3:1999 |
Plastics. Differential scanning calorimetry (DSC). Determination of temperature and enthalpy of melting and crystallization |
UOP Library |
ü |
| BS ISO 11357-4:2005 |
Plastics. Differential scanning calorimetry (DSC). Determination of specific heat capacity |
|
ü |
| BS ISO 11357-5:1999 |
Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion |
|
ü |
| BS ISO 11357-6:2002 |
Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time |
|
ü |
| BS ISO 11357-7:2002 |
Plastics. Differential scanning calorimetry (DSC). Determination of crystallization kinetics |
|
ü |
| ISO/CD 11357-8 (00/121250 DC) |
Plastics. Differential scanning calorimetry (DSC). Part 8. Determination of amount of bound water sorbed by polymers |
Draft for public comment - withdrawn. |
û |
| |
|
|
|
| |
Conditioning & environment |
|
|
| BS EN ISO 62:1999 |
Plastics. Determination of water absorption |
UOP Library |
ü |
BS EN ISO 175:2001
BS 2782-8:Method 830A:1999 | Plastics. Methods of test for the determination of the effects of immersion in
liquid chemicals |
|
ü |
| BS EN ISO 291:2005 |
Plastics. Standard atmospheres for conditioning and testing |
UOP Library |
ü |
| BS EN 2489:1995 |
Fibre reinforced plastics. Determination of the action of test fluids |
|
û
|
BS EN 60216-1:2002
IEC 60216-1:2001 | Guide for the determination of thermal endurance properties of electrical insulating materials. Ageing procedures and evaluation of test results |
|
û |
| BS EN 60216-2:2005 |
Electrical insulating materials. Thermal endurance properties. Determination of
thermal endurance properties of electrical insulating materials. Choice of test criteria |
|
û |
| BS EN 60216-3:2006 |
Electrical insulating materials. Thermal endurance properties. Instructions for calculating thermal endurance characteristics |
|
û |
| BS EN 60216-4-1:2006 |
Electrical
insulating materials. Thermal endurance properties. Ageing ovens.
Single-chamber ovens |
|
û |
BS EN 60216-4-2:2001
IEC 60216-4-2:2000 | Guide
for the determination of thermal endurance properties of electrical
insulating materials. Electrical insulating materials. Thermal endurance
properties. Precision ovens for use up to 300°C |
|
û |
BS EN 60216-4-3:2000
IEC 60216-4-3:2000 |
Guide
for the determination of thermal endurance properties of electrical
insulating materials. Electrical insulating materials. Thermal endurance
properties. Ageing ovens. Multi-chamber ovens. Multi-chamber ovens. |
|
û |
| BS EN 60216-5:2003 |
Electrical
insulating materials. Thermal endurance properties. Determination of
relative thermal endurance index (RTE) of an insulating material |
|
û |
| BS EN 60216-6:2006 |
Electrical
insulating materials. Thermal endurance properties. Determination of
thermal endurance indices (TI and RTE) of an insulating material using
the fixed time frame method |
|
û |
| |
|
|
|
| |
Sustainability |
|
|
| BS 8900:2006 |
Guidance for managing sustainable development |
|
|
| BS 8901:2009 |
Specification for a sustainability management system for events |
|
|
| BS 8902:2009 |
Responsible sourcing sector certification schemes for construction products |
|
|
| BS 8905 (under development) |
Guide to the sustainable use of materials |
|
|
| PAS 2060:2010 |
Specification for the demonstration of carbon neutrality (Publicly Available Specification) |
|
|
| |
|
|
|
| |
Composite material product standards |
|
|
| BS EN 40-7:2002 |
Lighting columns. Requirements for fibre
reinforced polymer composite lighting columns |
|
ü |
| BS EN 976-1:1997 |
Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Requirements and test methods for single wall tanks |
| |
| BS EN 976-2:1997 |
Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Transport, handling, storage and installation of single wall tanks
| | |
| prEN 976-4 |
Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels. Part 3. Requirements and test methods for double wall tanks. Part 3 :Requirements (97/123631DC)
| | |
| prEN 976-4 |
Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels. Part 4. Transport, handling, storage and installation of double wall tanks
(97/123629DC) | | |
| BS EN 977:1998 |
Underground tanks of glass-reinforced plastics (GRP). Method for one side exposure to fluids | | |
| BS EN 978:1997 |
Underground tanks of glass-reinforced plastics (GRP). Determination of factor a and factor ß | | |
| BS EN 1115-1:2001 |
Plastics
piping systems for underground drainage and sewerage under pressure.
Glass-reinforced thermosetting plastics (GRP) based on unsaturated
polyester resin (UP). General (c.f.
BS 7159:1989/BS 6464:1984) |
|
ü |
| BS 7159:1989 |
Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems for individual plants or sites |
|
û |
| BS 7491-1:1991 |
Glass fibre reinforced plastics cisterns for cold water storage. Specification for one-piece cisterns of capacity up to 500 L | | |
| BS 7491-2:1992 |
Glass fibre reinforced plastics cisterns for cold water storage. Specification for one-piece cisterns of nominal capacity from 500 L to 25000 L | | |
| BS 7491-3:1994 |
Glass fibre reinforced plastics cisterns for cold water storage. Specification for sectional tanks |
|
|
| ISO 10303-11:2004 |
Industrial automation systems and integration -- Product data
representation and exchange -- Part 11: description methods: the EXPRESS
language reference manual |
|
|
| ISO 10303-45:2008 |
Industrial automation systems and integration - Product data representation and exchange - Part 45:
integrated generic resource: material and other engineering properties |
| |
| ISO 10303-209:2001 |
Industrial automation systems and integration -- Product data
representation and exchange -- Part 209:
application protocol: composite and metallic structural analysis and
related design |
|
|
| Draft Standard ISO 11119-1 |
Gas cylinders of composite material - Specification
and test methods. Hoop wrapped composite gas cylinders (DC99/714046) |
|
û |
| Draft Standard ISO 11119-2 |
Gas cylinders of composite material - Specification
and test methods. Fully-wrapped fibre reinforced composite gas cylinders
with load sharing metal liners (DC99/714047) |
|
û |
| Draft Standard ISO 11119-3 |
Gas cylinders of composite material - Specification
and test methods. Fully-wrapped fibre reinforced composite gas cylinders
with non-metallic and non-load sharing metal liners (DC99/714048) |
|
û |
| BS EN ISO 12215-1:2000 |
Small craft. Hull construction and scantlings.
Materials. Thermosetting resins, glass-fibre reinforcement, reference
laminate |
UOP Library |
ü |
| BS EN ISO 12215-2:2002 |
Small craft. Hull construction and scantlings.
Materials. Core materials for sandwich construction, embedded materials |
UOP Library |
ü |
| BS EN ISO 12215-3:2002 |
Small craft. Hull construction and scantlings.
Materials. Steel, aluminium alloys, wood, other materials |
UOP Library |
ü |
| BS EN ISO 12215-4:2002 |
Small craft. Hull construction and scantlings.
Workshop and manufacturing |
UOP Library |
ü |
| prEN ISO 12215-5. |
Small craft. Hull construction and scantlings.
Part 5. Design pressures, design stresses, scantling determination
(ISO/DIS 12215-5 00/717312 DC) |
UOP Library |
û |
| ISO/DIS 12215-6 |
Small craft. Hull construction and scantlings. Part 6.
Structural arrangements and details (00/715272 DC) |
UOP Library |
û |
| ISO 12215-7 |
Small craft. Hull construction. Scantlings. Part 7.
Multihulls (06/30129565 DC) |
UOP Library |
û |
| prEN 12917 |
Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels. Assessment of conformity to EN 976-1 and EN 976-3 (97/123630DC)
| | |
| BS EN 13121-1:2003 |
GRP tanks and vessels for use above ground. Raw
materials. Specification conditions and acceptance conditions (c.f.
replaces
BS4994:1987) |
|
û |
| BS EN 13121-2:2003 |
GRP tanks and vessels for use above ground. Composite materials. Chemical resistance
(c.f. replaces
BS4994:1987) |
|
û |
| prEN 13121-3 |
GRP tanks and vessels for use above ground. Part 3.
Design and workmanship
(c.f. replaces
BS4994:1987 04/30046221 DC) |
|
û |
| BS EN 13121-4:2005 |
GRP tanks and vessels for use above ground.
Delivery, installation and maintenance
(c.f. replaces
BS4994:1987) |
|
û |
| BS EN 13280:2001 |
Specification for glass fibre reinforced cisterns of one-piece and
sectional construction, for the storage, above ground, of cold water |
|
û |
| ISO 13584;2001 |
Industrial automation systems and integration - Parts library
- Part 1: Overview and fundamental principles | | |
| BS EN ISO 14692-1:2002 |
Petroleum and natural gas industries. Glass-reinforced plastics
(GRP) piping. Vocabulary, symbols, applications and materials |
|
ü |
| BS EN ISO 14692-2:2002 |
Petroleum and natural gas industries.
Glass-reinforced plastics (GRP) piping. Qualification and manufacture |
|
ü |
| BS EN ISO 14692-3:2002 |
Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. System design |
|
ü |
| BS EN ISO 14692-4:2002 |
Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. Fabrication, installation and operation |
|
ü |
| ISO/TS 24817:2006 |
Petroleum, petrochemical and natural gas industries -- Composite repairs
for pipework -- Qualification and design, installation, testing and
inspection |
|
û |
| |
Construction industry standards |
|
|
| AASHTO LRFD GFRP-1 |
Bridge Design Guide Specifications for GFRP-Reinforced Concrete Bridge Decks and Traffic Railings
- First Edition,
November 2009 (contents). | | û |
| AASHTO |
Guide Specifications for Design of FRP Pedestrian Bridges
- First Edition, 2008. |
|
û |
| ASTM D7565/D7565M, |
Test method for determining
tensile properties of fiber reinforced polymer matrix composites used for
strengthening of civil structures |
|
|
| ACI 440.2R-02 |
Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures |
|
on-line |
| BD90/05 |
Design of FRP Bridges and Highway Structures |
|
û |
| DNV-OS-C501 |
Composite Components (January 2003) |
|
û |
| EUROCOMP |
JL Clarke (editor), Structural Design of Polymers and Composites: EUROCOMP design code handbook,
E&FN Spon (Chapman and Hall), London, 1996. ISBN 0-419-19450-9. |
UOP Library |
û |